HP System/E41 User Manual page 36

Chapter 4
STEP 5
Install the latch assembly.
The door has openings for the latch catch.
Remove any installed cover plate, insert the latch
catch, position the backing plate and secure with
screws.
32
STEP 6
Install ground cable.
A threaded stud is positioned near the Front Door
hinge pin. Attach the male connector to the stud with
two nuts to the door. A threaded stud is positioned
near the base of each column. Attach the ground
connector with two nuts. Connect the ground cable to
the male connector.
STEP 7
Re-energize.
Re-energize the equipment, if necessary.
Installation complete.
Procedures