Table of Contents
Advertisement
Quick Links
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
IMPORTANT:
Installer: Leave installation instructions with the homeowner.
Homeowner: Keep installation instructions for future reference.
W10526072A
INSTALLATION INSTRUCTIONS
24" (61.0 CM) GAS SINGLE
AND DOUBLE BUILT-IN OVEN
Table of Contents
BUILT-IN OVEN SAFETY .....................................................................1
INSTALLATION REQUIREMENTS......................................................3
Tools and Parts ..................................................................................3
Location Requirements......................................................................3
Electrical Requirements .....................................................................4
Gas Supply Requirements .................................................................5
INSTALLATION INSTRUCTIONS ........................................................6
Prepare Built-In Oven.........................................................................6
Make Gas Connection .......................................................................6
Install Oven.........................................................................................7
Complete Installation .........................................................................8
GAS CONVERSIONS............................................................................9
LP Gas Conversion ............................................................................9
Natural Gas Conversion...................................................................10
BUILT-IN OVEN SAFETY
Your safety and the safety of others are very important.
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
Advertisement
Table of Contents
Related Manuals for Whirlpool 24" (61.0 CM) GAS SINGLEAND DOUBLE BUILT-IN OVEN
Summary of Contents for Whirlpool 24" (61.0 CM) GAS SINGLEAND DOUBLE BUILT-IN OVEN
-
Page 1: Table Of Contents
INSTALLATION INSTRUCTIONS 24" (61.0 CM) GAS SINGLE AND DOUBLE BUILT-IN OVEN Table of Contents BUILT-IN OVEN SAFETY ..............1 INSTALLATION REQUIREMENTS............3 Tools and Parts ..................3 Location Requirements..............3 Electrical Requirements ..............4 Gas Supply Requirements ..............5 INSTALLATION INSTRUCTIONS ............6 Prepare Built-In Oven.................6 Make Gas Connection ...............6 Install Oven..................7 Complete Installation .................8 GAS CONVERSIONS................9... - Page 2 WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. – Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
-
Page 3: Installation Requirements
INSTALLATION REQUIREMENTS Product Dimensions - Single Oven Tools and Parts Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. Tools needed Tape measure Marker or pencil Phillips screwdriver Pipe-joint compound resistant to LP gas Flat-blade screwdriver "... -
Page 4: Electrical Requirements
Product Dimensions - Double Oven Cabinet Side View - Double or Single Oven A. 24" (60.9 cm) min. cutout depth B. 22 " (57.5 cm) recessed oven depth C. Oven front D. Recessed oven E. Cabinet Electrical Requirements A. 22 " (56.8 cm) max. recessed width WARNING B. -
Page 5: Gas Supply Requirements
A 120 volt, 60 Hz., AC only, 15-amp fused, electrical circuit is LP gas conversion: required. A time-delay fuse or circuit breaker is also Conversion must be done by a qualified service technician. recommended. It is recommended that a separate circuit No attempt shall be made to convert the appliance from the gas serving only this oven be provided. -
Page 6: Installation Instructions
For elevations above 2,000 ft (609.6 m), the burner should be Gas Pressure Regulator reduced 4% for each 1,000 ft (304.8 m) above sea level (not applicable for Canada). The gas pressure regulator supplied with this oven must be used. The inlet pressure to the regulator should be as follows for proper Gas Supply Pressure Testing operation:... -
Page 7: Install Oven
3. Use a " combination wrench and an adjustable wrench to 2. Test all connections by brushing on an approved attach the flexible connector to the adapters. Check that noncorrosive leak-detection solution. If bubbles appear, a connector is not kinked. leak is indicated. -
Page 8: Complete Installation
3. Securely fasten oven to cabinet using the 0.188 x 2.1" screws (4 for single oven, 6 for double oven) provided. Insert the Complete Installation screws through holes in decorative trim. To avoid cabinet 1. Check that all parts are now installed. If there is an extra part, damage, use the 0.140"... -
Page 9: Gas Conversions
GAS CONVERSIONS Gas conversions from Natural gas to LP gas or from LP gas to To Convert Gas Pressure Regulator Natural gas must be done by a qualified installer. 1. Locate gas pressure regulator in bottom compartment. WARNING Explosion Hazard Use a new CSA International approved gas supply line. -
Page 10: Natural Gas Conversion
3. Flip the regulator pin over and snap pin firmly into place. Natural Gas Conversion 1. Turn manual shutoff valve to the closed position. 2. Unplug oven or disconnect power. A. Natural gas position B. LP gas position A. To oven B. - Page 11 2. Unscrew the hex-shaped regulator cap from the regulator To Convert Oven Bake/Broil Burner and remove the regulator pin. 1. Remove racks from inside the broiler cavity. 2. Screw the burner orifice hood away from the pins. There will be approximately 1 to 2 turns.
- Page 16 W10526072A © 2012. Whirlpool Corporation. 7/12 All rights reserved. Printed in U.S.A.