Samsung 6300 Quick Start Manual

Attach the TV to Connect video
the Stand devices
Step Step
1
Warning: Screens can be damaged
from direct pressure when handled
incorrectly. We recommend lifting the
TV by the edges, as shown.
Step 1 Attach the TV to the Stand
1A
REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV
(such as the box).
1C
1E
1 2

QUICK START

GUIDE
BN68-05029A-02
Insert the Power on and
batteries into the start the initial
remote control setup
Step Step
2 3
Lay the TV on a soft surface, screen side down.
Use the packing material to protect the screen.
Fit the stand and mount together, making sure
the notch on the mount aligns with the stand.
Holding the stand parallel to the screen, slide
the stand into the notches on the back of the
TV.
3
Welcome to your new Smart TV!
The following instructions cover assembling, connecting, and setting up your new TV. Make
sure you have the accessories listed below.
Included in this box
Remote Control
Stand Mount
4
Remote Control IR extender
Batteries (AAA x 2) Cable manager
Also included: Cleaning Cloth, User Manual
1B
Base
1D
1F
Stand Parts and Cables
Power Cord
x 4
Wall mount adapter (46 inch and above)
46 - 50 inches models: 2 pieces (BN96-18153B)
55 inches and above models: 4 pieces (BN96-18153A)
Find the stand base and screws in the box
and set aside.
Screws
32 inch models: 7EA
40 inch and above models: 8EA
Screws
Insert 4 screws and secure the stand to the
mount.
32-55 inches models:
60-65 inches models:
Insert screws and secure the stand to the TV.
32 inch models: x3 (M4 X L12)
40-55 inches models:
60 inches and above models:
x4 (M4 X L10)
x4 (M4 X L12)
x4 (M4 X L10)
x4 (M4 X L12)