D-Link AirPlus DI-614+ User Manual page 48

Networking Basics
Checking the IP Address in Windows XP/2000
Type ipconfig /renew at the prompt to get a new IP Address. Click Enter.
The new IP Address is shown below.
(Windows 98/ME users:
winipcfg at the prompt. Click Release and Renew to obtain a new IP
Address.)
Assigning a Static IP Address
Note: Residential Gateways/Broadband Routers will automatically assign IP
Addresses to the computers on the network, using DHCP (Dynamic Host
Configuration Protocol) technology.
Gateway/Router you will not need to assign Static IP Addresses.
If you are not using a DHCP capable Gateway/Router, or you need to assign a
Static IP Address, please follow these instructions:
• Go to Start
• Double-click on
Control Panel
go to Start > Run. Type Command. Type
If you are using a DHCP-capable
48