Wall Mounting - Miele DA 1160 Operating And Installation Instructions

^ For extraction mode you must also
3
drill a 6 / " (170 mm) hole through
4
the bottom of the cabinet.
^ If you want to lay the power cord
though the cabinet you must drill a
hole for it, too.
^ Lift the hood up under the cabinet
and feed the power cord through the
respective hole in the bottom of the
cabinet.
^ From the inside of the cabinet, fasten
the hood to the cabinet using the
screws provided.
^ Put the grease filter back in place.

Wall mounting

You can also mount the device to a wall
using the two wall anchors.
,
The screws and dowels are
suitable for solid brick walls.
For other types of walls, use
appropriate materials.
Make sure that the wall can support
the weight.
^ Fasten the cut-out drill template to
the wall. The template's upper edge
marks the upper edge of the hood.
Observe the safety clearance (S) to
the cooktop (see "Appliance
dimensions").
^ Mark and drill the four holes
(C 8 mm) for the wall anchors.
^ Remove the drill template.
Installation
23