Installation; Connecting The Projector; Install The Projection Lens - Optoma Projectors User Manual

Before install or

replacing the lens,
switch off the power
to the projector
Avoid using the

remote control or
projector keypad
button to adjust the
lens shift or zoom/
focus while the lens
attachment process
is carried out.
PCB
(Printed Circuit Boards)

Connecting the Projector

Install the Projection Lens

2
5
Install Lens Procedure:
1. Unscrew the 2 screws and lift up the lens door. 1
2. Remove the projector cap. 2
3. Push the release lever up to release the lock. 3
4. Remove the lens cap. 4
5. Push the lens into position. 5
6. Push the release lever down to lock the lens in place. 6
(Please note that need to align the PCB)
To replace the lens, reverse the previous steps.

Installation

1
4
3
6
11
English