Installing The Gr2000-B On A Table Or Desk; Figure 2-5 Attaching The Rubber Feet - Hitachi GR2000-B Series Quick Start Manual

Hitachi Gigabit Router GR2000-B Series Quick Start Guide
2.5

Installing the GR2000-B on a Table or Desk

You can install the GR2000-B on a stable and flat table or desk. Install the router
according to the following procedures. If you want to install a GR2000-B in a rack,
see the GR2000-B Installation Guide.
*
Note: Do not attach the rubber stoppers to the router when installing it into a rack.
1. Place the router upside down on a flat, clean surface.
2. As shown in Figure 2-5, attach the rubber feet to the 1.5 mm holes (4 holes in
all).
Attach Rubber Feet
to 1.5 mm holes (4)

Figure 2-5 Attaching the Rubber Feet

3. Turn over the router and install it on a desk.
2-6 GR2K-GA-0008
Rev. 1.00