Various Operation Methods; Hold Function; Hold; Hold Release - Hitachi WIRELESSIP TD61-2472A User Manual

User's Manual

3. Various operation methods

3.1. Hold function

This is used to put a call on hold. The hold tone is played on the terminal that you have put on hold.
3.1.1

Hold

During a call, you can put the other party on hold by pressing the Send key.
Example: Putting B on hold
While A and B are talking, if A presses the Send key, B is put on hold.
Press the Send key.
At this time, the screens for A (the terminal that put the call on hold) and B (the terminal that was put on
hold) display as below and the hold tone is played on B (the terminal that was put on hold).
<Screen for the terminal
putting the call on hold>
3.1.2

Hold release

During a hold, you can end the hold by pressing the Send key.
H it a c hi C ab le
During call
A
A
Telephone number:
Holding
A
A
Telephone number: 2314 Telephone number: 2310
7 3 /8 4
B
Telephone number:
<Screen for the terminal
put on hold>
B
書式変更 : フォント : Times
New Roman, 10 pt
♪
♪
書式変更 : フォント : Times
New Roman, 10 pt