Picture Mode; White Level; Black Level; Sharpness - Hitachi 37HLX99 Operating Manual

Video
Video
Select VIDEO to adjust picture settings and improve
picture quality. You can independently customize each of
the Video Inputs to your preference to increase viewing
performance and pleasure depending upon the video
program being viewed. If RESET is selected, only the
selected input will reset to initial conditions.

Picture Mode

Use this function to choose from automatic picture
settings to optimize your TV's performance.
1. Use the CURSOR buttons
select PICTURE MODE settings (Day-Normal,
Day-Dynamic or Night).
2. Then press the SELECT button to set the mode and
return to the Video menu or press EXIT to quit menu.
3. There are 3 Picture Modes available for the customer
Day (Dynamic), Day (Normal) and Night mode.
Day (Dynamic) is the original factory preset mode , this
can be changed by adjusting any video setting to your
desire conditions. Day ( Normal ) can be used as a
second video setting for daytime viewing. Night is set
to watch programing during nigthtime.
1. Use the CURSOR PAD
2. Press the SELECT button or the CURSOR PAD
3. Press the CURSOR PAD
4. Press MENU to return to main menu.
5. Press EXIT to quit menu.

White Level

Use this function to change the white level in the picture.

Black Level

Use this function to change the black level in the picture.
Color
Use this function to adjust the level of color in the picture.
Tint
Use this function to adjust flesh tones so they appear
natural.

Sharpness

Use this function to adjust the amount of fine detail in the
picture.
Motion Sharpness
When moving picture occurs detail in the picture is lost
this function improves the picture detail in 3 modes Off,
Low and High.

Back Light

Use this function to change the back light of the LCD
panel, this will increase or decrease the brightness of
the LCD panel, but not the brightness of the video signal.
or to highlight and
or or CHANNEL WHEEL to highlight the function to be adjusted.
to select the function settings.
or to adjust the function.
Video
Audio
TV Guide On Screen
Channel Manager
Locks
Timers
Setup
Power Swivel
SEL
Move Select
Video
Day(Dynamic)
Picture Mode
White Level
OR 100%
Black Level
50%
Color
Tint
Sharpness 50%
Motion Sharpness Off
Back Light
Color Temperature High
SEL
Move Select
OR
OR
Picture Mode
SEL
Next/Prev Select Return
Video
Audio
TV Guide On Screen
Channel Manager
Locks
Timers
Setup
Power Swivel
SEL
Move Select
Video
Day(Dynamic)
Picture Mode
White Level
OR 100%
Black Level
50%
62%
Color
Tint
Sharpness 50%
Motion Sharpness Off
Back Light
50%
Color Temperature High
SEL
Move Select
Air
62%
50%
Day (Dynamic)
Air
43