Speaker System Hookup - Hitachi HTD-K160 Instruction Manual

Speak Speak

Speaker System Hookup

Speak Speak er System Hookup er System Hookup er System Hookup er System Hookup
Connect the supplied speaker system using the supplied speaker
cords by matching the colors of the terminals and those of the
cords.
At the rear of each supplied speakers you will find two click fixa-
tion connectors, a black one is for (-) and a red / white / green
/ gray / blue one is for (+).
Speakers
FRONT (R)
FRONT (L)
CENTER
SURROUND (R)
SURROUND (L)
•
Connect the active Subwoofer to the RCA jack of WOOFER
LINE OUT.
Required subwoofer cable (supplied):
Black
Active Subwoofer
To avoid short-circuiting the speakers
•
Short-circuiting of the speakers may damage the system. To
prevent this, make sure to take the following precautions when
connecting the speakers.
•
Make sure the stripped end of each speaker cord does not
touch another speaker terminal or the stripped end of another
speaker cord.
Examples of poor conditions of the speaker cord
•
Stripped speaker cord is touching another speaker terminal.
+
BLACK RED
WHITE
BLACK
GREEN
BLACK
BLACK
GREY
BLACK
BLUE
Black
Front Right Speaker
+
A U D I O
IN
L
R
AUX IN
+ +
•
Connect the Front Left speaker to the FL terminals.
•
Connect the Front Right speaker to the FR terminals.
•
Connect the Center speaker to the C terminals.
•
Connect the Surround Left speaker to the SL terminals.
•
Connect the Surround Right speaker to the SR terminals.
Required speaker cords (supplied):
Rear Surround Right Speaker
Center Speaker
FR FL C SR SL
AUDIO
OUT
(8 )
Front Left Speaker
•
Stripped cords are touching each other due to excessive re-
moval of insulation.
Note
•
Be sure to match the speaker cord to the appropriate terminal
on the components: + to + and - to -. If the cords are reversed,
the sound will be distorted and will lack of bass.
•
If you use front speakers with low maximum input rating, adjust
the volume carefully to avoid excessive output on the speakers.
+
Rear Surround
Left Speaker
+
15