Controls And Features; Power-On Indication; Voice; Automute - Beltronics Ultimate Pro 200 Owner's Manual

Controls and Features

Power
To turn your Pro200 on or off,press the
PWR button located on the top.When you
turn your Pro200 on,it goes through a
sequence of alerts.
If you prefer,you may program your
Pro200 for a shorter power-on sequence.
See the Programming section for details.
Volume
Press and hold the Volume/Mute button
located on the top case to adjust the
Pro200's alert volume level.The audio will
ramp up and down,accompanied by a bar-
graph on the display.Once you've reached
your preferred audio level,simply release
the button.

Power-on indication

After the Pro200's start-up sequence is
complete,the alphanumeric display will
show Highway,AutoScan,or City to
indicate which sensitivity mode is selected.
If you prefer,you can select alternate
power-on displays.See the Programming
section for details.
Voice Alerts
The Pro200 provides digital voice
announcements of radar and laser bands
detected.If Safety Radar (SWS) is turned on,
a safety radar message will also be
announced.See the Programming section
for details.
If you prefer,you can turn Voice Alerts
off.See Programming section for details.

AutoMute

Your Pro200 has our patented AutoMute
feature.After the Pro200 alerts you to a
radar encounter at the volume you have
selected,the AutoMute feature will
automatically reduce the volume to a lower
level.This keeps you informed without the
annoyance of a continuous full-volume
alert.
If you prefer,you can turn the
AutoMute feature off.See the Programming
section for details.

Mute

The Mute button,located on the Pro200's
top case,allows you to silence the audio
alert during a radar encounter.
To mute the audio for a single specific
signal,briefly press the Mute button.After
that radar encounter has passed,the mute
will automatically reset and the audio will
alert you to the next encounter.
8

Highway / AutoScan / City Button

The City button selects the Pro200's
sensitivity mode.We recommend the
AutoScan mode for most driving.
Your Pro200's AutoScan mode
provides long-range warning,with
minimum false alarms.In this mode,the
Pro200's internal computer continuously
analyzes all incoming signals and
intelligently filters out false alarms.
You can also select conventional
Highway and City modes.When driving in
urban areas where annoying X-band
intrusion alarms and door openers are
common,City mode can be engaged to
lower X-band sensitivity and reduce X-band
alerts.Full sensitivity is maintained on all
other bands.You can also customize your
Pro200's City mode sensitivity,including
"No X"mode.See the Programming section
for details.
Brightness
The Pro200's BRT button selects the
brightness of your Pro200's display.There
are four settings:Maximum,Medium,
Minimum,and Dark.Press the BRT button
to select your preferred brightness.
Dark Mode
When you select the Dark mode with the
BRT switch,your Pro200 changes to a very
inconspicuous power-on indication:a very
Dim AD,HD,or CD.(In this display,the A,H,
or C indicates Auto,Highway,or City,and
the D indicates Dark.)
When the Pro200 is in the Dark mode,
the display will not show visual alerts when
Pro200 detects signals.Only the audible
alert will tell you of detected signals.
9