Leds - Hitachi SH-G1000 User Manual

Pcs vision picture phone with built-in camera
Table of Contents

Advertisement

LEDs

This device is equipped with three status LEDs.
3. For Phone Power
1. LED For Charging
Steady amber: Charging in progress
Steady green: Charging completed
Steady red: Charging stopped (because of high ambient temperature)
2. LED For Reminder
Flashes orange: Alarm for the programmed plan and job
3. LED For Phone power
Flashes green at various intervals as below when the phone is on.
In Service: Blinks at intervals of five seconds (with a shorter On time
period)
Flashes at this interval when service is available; this is not true of
active MIP data connections mentioned below. The statuses where this
happens include idle, voice call, and inactive data connections.
Active Data Service: Blinks at intervals of 0.5 second
Flashes at this interval when an active MIP data connection is
established. The flashing status for in-service is restored when data
connection becomes inactive.
1. For Charging
2. For Reminder
Section 2: Understanding Your Device
2A: Your PCS Phone – The Basics
29

Advertisement

Table of Contents
loading

Table of Contents