Using The Electronic Image Stabilizer (Eis); Displaying Recording Guidelines (Auxiliary Line) - Hitachi DZ-BD70A Instruction Manual

HDD BD-RE BD-R RAM -RW (VR)
Using the Electronic
Image Stabilizer (EIS)
EIS corrects for fuzziness in an image
when you zoom in on a subject.
We recommend turning EIS Off when
you position the camcorder on a table
or use a tripod when recording.
Turning EIS Off/On
During recording pause, press
1
MENU.
Select "Camera Functions Setup"
2
"EIS" "On"/"Off"
Press the confirmation button to
confirm, then MENU to end.
When the function is turned On,
" " appears in the LCD
monitor (p.42).
• EIS is retained in memory
3
even when the power is turned
off.
• If "Off" is selected, be sure to
return the setting to "On"
afterwards, if you do not
normally use a tripod, etc.
Notes
• When EIS is active, there will be
a slight divergence between the
actual camera movement and the
on-screen movement.
• Even if EIS is turned On, the
camera movement may not be
corrected if the movement is too
excessive.
72
-RW (VF)
R
• EIS may not function correctly
• When using a card (recording
• Subjects may be distorted or blur
HDD
Displaying Recording
Guidelines
(Auxiliary Line)
You can display recording guidelines
to help compose your shots.
Turning recording
guidelines On/Off
1
2
3
We recommend you stabilize the
camcorder using both hands and
support your arms against your
body when recording.
when a tele-conversion lens or
wide-conversion lens is used.
stills), EIS cannot be set.
while EIS is On due to the nature
of the image sensor (CMOS
sensor), which is not a
malfunction. Also refer to
"Troubleshooting" (p.140).
BD-RE BD-R RAM -RW (VR)
During recording pause, press
MENU.
Select "Camera Functions Setup"
"Auxiliary Line" "On"/"Off"
Press the confirmation button to
confirm, then MENU to end.
When "On" is selected, vertical
and horizontal guidelines appear
in the LCD monitor.
-RW (VF) R CARD