Panasonic Easa-Phone VA-30910 Operating Instruction page 12

Easa-phone key telephone system

Hide thumbs Also See for Easa-Phone VA-30910:

Table of Contents

Making Calls

With system speed dial you use a two digit address number instead of dialing the whole telephone

number.

You can use the address number

for system speed dial on all system telephones.

Up to 90 address

numbers for system speed dial from 00 to 89 can be stored, and a telephone

number can

be stored even while the other telephones

are being used.

Telephone

numbers of up to 16 digits including x , # , FLASH and PAUSE can be stored.

If a new telephone

number is stored, the old telephone

number is erased and new contents are set.

To store a number

(from extension

1 0 only)

1. Press ON/OFF

key

* Listen for the intercom dial tone from speaker.

The ON/OFF indicator will

I@ht up.

2. Press AUTO key

3. Press any address number from 0 0 to 8 9

4. Press the telephone

number for speed dial storing

5. Press HOLD key

(If you wish to store another system speed dial, repeat steps 2 to 5 for each

case)

6. Press ON/OFF key

* The ON/OFF indicator goes off.

Table of Contents