Table of Contents
Advertisement
Installation
(9) AUDIO INPUT (Stereo mini jack)
Use to obtain sound when INPUT1, INPUT2 or
INPUT5 is selected.
Connect this jack to the audio output connector of the
device connected to the plasma display' s INPUT1 or
INPUT2, or to the audio output connector of the
device connected to the video card' s INPUT5
(10) AUDIO OUTPUT(Stereo mini jack)
Use to output the audio of the selected source
component connected to the plasma display to an AV
amplifier or similar component
(11) MAIN POWER switch
Use to switch the main power of the plasma display
on and off.
(12) AC INLET
A power cable is furnished with the plasma display:
connect one end of the power cable to this connector,
and the other end to a standard AC power source.
(13) SPEAKER (L) terminal
For connection of an external left speaker. Connect a
speaker that has an impedance of 8 -16 .
Video Card
<DTV 6010> Section
The video card is provided with 1 TV input connector,
1 SCART video input connector, and 1 DVI video
input connector.
(14) TV VIDEO INPUT3
Connect TV antenna to the TV input connectors of
components connected to the video card' s INPUT3 .
Note: This TV card is compatible with PAL BG / DK/ I
TV system .
(15) SCART INPUT4
For connection of components that have a
SCART. S-video or Composite video output jack
such as a video deck, video camera, laser disc player,
or DVD player.
(14) DVI- I INPUT5
In the case of INPUT5 the DVI-I connector will only
accept digital information. (The analogue portion of
the connector is not connected)
Note: This unit does not support the display of
copy guard-protected video
Installing the Video Card
TO USERS:
This component is sold with the understanding
that it will be installed by a specialist possessing
appropriate technical knowledge and ability.
USAGE GUIDELINES
All phosphor-based screens (including conventional
tube-type) can be affected by displaying static
images for a prolonged period. Plasma Display
Screens are no exception to the rule. After- image
and permanent effects on the screen can be avoided
by taking some basic precautions, which include
following the recommendations listed below:
Whenever possible, avoid frequently displaying the
same image or virtually still moving pictures. Do not
display Teletext for a prolonged period of time.
Avoid viewing the On Screen Display for extended
periods, from a decoder, DVD player, VCR or other
equipment.
Do not leave the same picture Freeze-framed or
paused continually over a long period of time. Do not
display the different Picture in Picture screens for a
prolonged period of time.
After displaying a PC image or any other still image,
it is recommended to view a normal moving picture in
the 'Wide' or 'Full' screen set for more than 3 times
the length of the previous still image.
TO SALES AGENTS:
Installation instructions are noted below. When
installing the unit, if a screw or other object
drop inside the plasma display, immediately consult
your nearest Pioneer
operation may result
This device has been designed for installation in
the Pioneer Plasma Display PDP- 433 MXE /
PDP-503MXE.
signals.
6
should
Service Center. Continuing
in malfunction.
Advertisement
Table of Contents
