Connections - Panasonic TH-50PB2W Operating Instructions Manual

Connections

AC cord connection and fi xing, cable fi xing
When using the Wall-hanging bracket (vertical) (for TH-50PB2W)
Note:
When using the Wall-hanging bracket (vertical) (TY-WK42PV20), use the holes
the clamper is used on the hole
TH-50PB2W
Using the clamper
Secure any excess cables with clamper as required.
Note:
One clamper is supplied with this unit. In case of securing cables at three positions, please purchase it separately.
Attach the clamper
1
Insert the clamper
in a hole.
10
AC cord fi xing
Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Note:
Make sure that the AC cord is locked on
both the left and right sides.
, the cables may be caught by the wall-hanging bracket.
To remove from the unit:
hole
Keep pushing
both side
snaps
TH-65PB2W
Bundle the cables
2
snaps
hooks
Unplug the AC cord
Unplug the AC cord pressing the
two knobs.
Note:
When disconnecting the AC cord, be
absolutely sure to disconnect the AC
cord plug at the socket outlet fi rst.
and to secure the cables. If
To loosen:
Set the
knob
tip in the
hooks
Keep
pushing
the knob