Recharging From A Pc Connected With Usb Connection - Kenwood MGR-E8 Instruction Manual

Recharging from a PC connected with USB connection

This unit incorporates a rechargeable battery (hereafter "the battery"),
which can be charged from a PC connected through a USB cable.
1
Start up the PC
2
Connect a USB cable to the USB port of the PC
3
Connect the USB cable to the USB jack of this unit
The battery will be recharged fully in about 2.5
hours.
The battery icon is animated during recharging.
When recharging completes (about 4 hours), the
icon stops in the "
4
Disconnecting this unit from the PC (page 67)
For the PC system requirements, see <Specifications> (page 76).
This unit is switched ON automatically at the moment it is connected to the PC.
When the USB connection, always use a supplied USB cable.
This unit should be connected directly to the USB port of the PC. We cannot
guarantee the operation if this unit is connected via a USB hub.
Recharging is not possible during data transfer with the PC. If software that loads
files permanently from this unit is running, exit it before recharging.
USB cable
" condition.
17
Continued to next page
English