Dell C5765dn User Manual page 327

Note
Receive E-mail
Port Status
Select [Enabled] when you receive e-mails.
Send E-mail
Port Status
Select [Enabled] when you send e-mails.
E-mail Notification Service
Port Status
Select [Enabled] when you use the E-mail Notification Service. The E-mail Notification
Service notifies you of the machine status or the completion of a print job, and a direct fax
job by e-mail.
Note
WSD
Note
WSD Print - Port Status
Select [Enabled] to use WSD Print.
Set this when you search a device on a network from Windows Vista
Windows
Port Number
Enter a port number from 1 to 65535.
The default value is 80.
Note
Internet Services (HTTP)
Port Status
Select [Enabled] to use Dell Printer Configuration Web Tool.
For more information about Dell Printer Configuration Web Tool, refer to "Dell Printer
Configuration Web Tool Settings" (P.417).
Port Number
Enter a port number for the Internet Services from 1 to 65535.
The default value is 80.
Note
• Select a communication mode to send data scanned via FTP from [Passive Mode] and [Active Mode].
[Passive Mode] is selected by default. You can change the setting from Dell Printer Configuration Web
Tool.
• [Consumables Status], [Parts Status], [Paper Tray Status], [Output Tray Status], [Jam Status],
[Interlock Status], and [Fault Notice] are notified as the machine status.
• You can configure the E-mail Notification Service in Dell Printer Configuration Web Tool.
• WSD stands for Web Services on Devices.
®
8.
• If the default port number is used, it may conflict with other ports. Make sure to set up the port number
that is not in use.
• If the default port number is used, it may conflict with other ports. Make sure to set up the port number
that is not in use.
• You cannot select [Port Number], if HTTP port is disabled.
To configure [Port Number], enable port status and reboot the machine, and then configure [Port
Number].
Connectivity & Network Setup
® ®
, Windows 7, and
327