Alarm Type; Record Setting - Mitsubishi Electric DX-NT400E Installation And Operation Manual

<RECORD SETTINGS> (continued)

ALARM TYPE

This item is used to set the camera selection during alarm
recording.
<ALARM SETTING>
ALARM RECORD CAMERA
1
2
3
4
EMR
>>ALARM TYPE
<RECORD SETTING>
NO PPS
3.125P STD
1
3.125P STD
2
3 3.125P STD
4 3.125P STD
>>ALARM TYPE
PRE ALARM REC
<ESTD REC>
Setting (default: "ALARM CH")
"ALARM CH": Performs alarm recording only by the
cameras set for alarm recording and input with alarm
signals. When there is an input of alarm signals from
multiple cameras, performs alarm recording by all
the cameras containing alarm signals.
"ALARM PLUS": Performs alarm recording by the
camera input with alarm signals during normal
recording at the frame speed set in "A-PPS" while
all the other cameras records in the normal PPS.
1. Press the SET UP button } <SETTINGS> } Select
"ALARM SETTING" or "RECORD SETTING" in the <RECORD
SETTINGS> screen and then press the ENTER button.
• The <ALARM SETTING> or the <RECORD SETTING> screen
appears.
2. Press the JOG
"ALARM TYPE" and then press the ENTER button.
• The background of the setting item turns red and flashes.
3. Display the desired item and then press the ENTER button.
• The setting item is determined and flashing stops.
4. Press the CLEAR button or the SET UP button.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
42
TRIGGER
--- EXT
1
- -- 2 EXT
-- - 3 EXT
--- 4 EXT
1 2 3 4
ALARM CH
CLEAR:BACK
GRADE A-PPS A-GRADE
3.125P STD
3.125P STD
3.125P STD
3.125P STD
ALARM CH
OFF
CLEAR:BACK
D H M
, buttons to move to the cursor to

RECORD SETTING

This menu is used to set the recording intervals and
recording picture quality for normal recording and alarm
recording.
<RECORD SETTING>
NO PPS GRADE A-PPS
>> 3.125P STD
1
3.125P STD
2
3 3.125P STD
4 3.125P STD
ALARM TYPE
PRE ALARM REC
<ESTD REC>
CAUTION: For <ESTD REC>,
see "Continuous recording time table" on page 77.
Setting of "PPS" and "A-PPS" (default: "3.125P")
"6.25P," "3.125P," "2.083P," "1.563P," "1.25P,"
"1.042P," "0.781P," "0.625P," "0.25P," "0.125P,"
"0.063P," "0.031P," "- - - - - -"
"- - - - - -": Does not perform recording with camera
set to this item.
Setting of "GRADE" and "A-GRADE" (default: "STD")
"SUPER," "HIGH," "STD"(STANDARD), "BASIC,"
"LONG"
1. Press the SET UP button } <SETTINGS> } Select
"RECORD SETTING" in the <RECORD SETTINGS> screen
and press the ENTER button.
• The <RECORD SETTING> screen appears.
2. Press the JOG , buttons to select the desired camera
number and then press the ENTER button twice.
• The setting item of "PPS" is highlighted when the ENTER
button is pressed once. When the button is pressed again,
the background turns red and flashes.
For the details concerning normal recording
settings, see "Setting the recording interval and
recording picture quality for normal recording" on
pages 25 and 26.
3. Display the desired item and then press the ENTER button.
• The setting item is determined and flashing stops.
4. Press the JOG button to highlight the setting item of
"GRADE" and then press the ENTER button.
• The background of the setting item turns red and flashes.
5. Display the desired item and then press the ENTER button.
• The setting item is determined and flashing stops.
6. (When setting recording intervals and recording picture
quality for alarm recording • • • )
Repeat steps 4 and 5 to select desired settings for "A-PPS"
and "A-GRADE" as well.
7. Press the CLEAR button or the SET UP button.
A-GRADE
3.125P STD
3.125P STD
3.125P STD
3.125P STD
ALARM CH
OFF
CLEAR:BACK
D H M