Table of Contents
Advertisement
Fig. 26A - SET TIME
(while at Home)
indicates Away
is Default Time
Fig. 26B - SET TIME
(while Away)
32
Set Time of Day, information includes (Fig. 26A/B):
This setting directly changes the Time of Day that is selected to
be the Watch Default Time, whether it is Home Time or Away
(travel location) Time. The other will be changed by the Dual
Time Differential set.
> Graphic SEt
> Time of Day (hr:min), Hour digits flashing, with AM (or PM)
icon if 12 hour Format, no icon if 24 Hour
> Away (Up Arrow) icon, if Away is the Watch Default Time
• A (hold) - to scroll upward through Hour Set Points at a rate
of 8 per second from 12: AM to 11: PM, or 0: to 23: if
24 Hour Format, in increments of 1: (hr).
• A (< 2 sec) - to step upward through Set Points one at a
time.
• M (< 2 sec) - to step back through Set Points one at a time.
• S (< 2 sec) - to save the Hour Set Point and flash the Minute
digits.
• S (2 sec) - to step back to Set Dual Time Differential.
• A (hold) - to scroll upward through Minute Set Points at a
rate of 8 per second from :00 to :59 in increments of :01
(min).
• A (< 2 sec) - to step upward through Set Points one at a
time.
• M (< 2 sec) - to step back through Set Points one at a time.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the GEO 2 and is the answer not in the manual?
Questions and answers
battery showed low, so we changed it. The screen will not light up at all
The screen on the Oceanic GEO 2 is not lighting up properly after changing the battery likely because the original battery leaked and caused internal damage. Although the new battery powers the unit (screen lights up faintly), the display is unreadable, indicating possible damage to the screen or internal electronics from the battery leak.
This answer is automatically generated