Set The Alarm - Gigaware 40-310 User Manual

Clock Radio Settings
Set the Clock Time
1. Press
setting mode. The hour digits flash.
2. Press + or – to set the hour.
3. Repeat steps 1 and 2 to set the minutes.
4. Press
n
Note: The clock uses a 12 hour format with AM and PM indicators.

Set the Alarm

1. Press
2. Press ALARM MODE on the remote repeatedly to select
a wake-up mode: Buzz, iPod or FM.
3. Press
The alarm icon
4. Press + or – to set the hour.
5. Repeat step 3 and 4 to set the minutes. Press
When the alarm sounds, press G/F or
G on the remote control to stop the alarm for 24 hours, and the
clock radio goes back to the mode before the alarm activated.
n
Notes:
• When you set the wake-up mode to FM radio, the station you last
listened to will switch on.
• To wake up to iPod, your iPod must be properly docked and turned
off. If your iPod is not docked, the alarm defaults to the buzz alarm.
• If the alarm is set, it turns on at a default volume level 4 and
increases to 30 within 1 minute. It stops after 20 minutes without
any operation.
button on your clock radio to enter the time
again to confirm.
to turn on/off the alarm.
on the clock radio to enter alarm setting mode.
and hour digits flash.
on the clock radio or
7
to confirm.