Safety ..................................2 National Conventions ............................2 Installation ................................3 Cleaning ................................4 Other .................................. 5 Setup ..................................6 Contents in Box ..............................6 Setup Stand ............................... 7 Adjusting Viewing Angle ............................. 9 Connecting the Monitor ............................ 10 Installation of USB Graphic software on your computer ..................11 For Microsoft ®...
Safety National Conventions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: A NOTE indicates important information that helps you make better use of...
Installation Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product.
Cleaning Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet. When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface.
Other If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center. Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vibration or high impact conditions during operation.
Adjusting Viewing Angle For optimal viewing, it is recommended to look at the full face of the monitor, and then adjust the monitor's angle to your own preference. Hold the stand so you will not topple the monitor when you change the monitor's angle.
Connecting the Monitor Cable Connections In Rear of Monitor to Connect PC/Laptop: Important!! Follow the software installation described on page 11 to 15 before connecting the USB monitor to your Laptop/PC. 1 Connecting the LCD monitor to your computer To protect the equipment, always turn off the computer before connecting. Connect one end of the USB cable to the LCD monitor and the end of USB cable to the computer.
Installation of USB Graphic software on your computer For Microsoft ® Windows® 7 Important!! Install the USB Graphic software first before connecting the USB monitor to your computer. 1. Double click on Setup.exe The Windows User Account Control window opens (if enabled in the OS). 2.
Page 13
The DisplayLink software end user license agreement windows opens (see above). 6. Click I Accept The DisplayLink USB Graphics software installs, without notification that it has completed. Note: On some machines you may need reboot before you can use your AOC USB Monitor.
For Microsoft® Windows Vista® Important!! DO NOT connect USB Monitor to your PC/Notebook before the software install. 1. Double click on Setup.exe The Windows User Account Control window opens (if enabled in the OS). 2. Click Yes The USB Monitor software end user license agreement window opens. 3.
Page 15
4. Connect your AOC USB Monitor via the USB cable to your PC/Notebook. Installing device driver message The Windows User Account control window opens. 5. Click YES DisplayLink automatically installs the AOC USB Monitor. The DisplayLink software end user license agreement windows opens (see above).
DisplayLink core software and DisplayLink Graphics installs. Note: The screen may flash or go black during the installation. 3. Connect your AOC USB Monitor via the USB cable to your PC/Notebook. The following message (or similar) will be seen. Windows installs the AOC USB Monitor device.
The desktop appears on the display marked 2. The display marked 1 become blank. To control the behavior of an attached AOC USB monitor, it is also possible to use Windows Key ( ) + P to display a menu (and cycle through it) to switch mode.
To Control the Display You can use the AOC USB LCD monitor in mirror mode or extended mode. Settings may vary depending on your operating system. For Microsoft® Windows® 7 Press the Windows® key ( ) + P to switch between different modes as shown below.
BIOS, hardware driver or operating system updates. The AOC USB Monitor utilizes an advanced video graphics controller to display the video. However, due to USB 2.0 transfer speed limitations, some or all portions of DVD playback may appear slow or choppy.
PC Requirements DisplayLink software can be used on PCs, from Netbooks, Notebooks/Laptops to Desktops. The driver will run on processors ranging from Atom N270 based PCs, basic single Core CPUs, and of course the latest Dual, Quad Core and Core i3/i5/i7 CPUs.
Windows Vista For Windows Vista, the Windows Experience Index (WEI) is a useful measure of hardware level. The WEI is accessible from Computer > Properties, or from Control Panel > System. The recommended typical hardware requirements for the PC are: WEI score of at least 3 in the 'Graphics;...
Page 22
Graphics Card Support (Windows Vista/Windows 7) On Windows Vista and Windows 7, DisplayLink software interacts closely with the primary graphics card. DisplayLink support and test a single graphics card (GPU) installed in a PC from all major GPU vendors (Intel, ATI, NVidia and Via) The following GPU configurations may exhibit compatibility issues on Windows 7 and Vista in certain circumstances: Switchable Graphics (ATI/Intel)
AOC should you encounter problems that you cannot resolve. Before you call AOC service center, please read the troubleshooting advice in this manual and in your computer User's Manual. You may also want to consult with your system administrator or company technical support staff.
Specification General Specification Model name E2251F Driving system TFT Color LCD Viewable Image Size 546.7 mm diagonal Pixel pitch 0.2482 (H)mm x 0.2482 (V)mm Panel Video R, G, B Analog interface Separate Sync. Display Color 16.7M Colors Dot Clock 148.5MHz Horizontal scan range 67.5Khz Horizontal scan...
Regulation FCC Notice FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
EPA Energy Star ENERGY STAR® is a U.S. registered mark. As an ENERGY STAR® Partner, AOC International (Europe) BV and Envision Peripherals, Inc. have determined that this product meets the ENERGY STAR® guidelines for energy...
AOC Color Monitors sold within Europe AOC International (Europe) BV warrants this product to be free from defects in material and workmanship for a period of Three (3) years after the original date of consumer purchase. During this period, AOC International (Europe) BV will, at its option, either repair the defective product with new or rebuilt parts, or replace it with a new or rebuilt product at no charge except as *stated below.
Page 28
OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO EVENT SHALL AOC INTERNATIONAL (EUROPE) BV BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE OR FACILITIES OR EQUIPMENT, OR OTHER INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
In the United States and Canada contact your Dealer or EPI Customer Service, RMA Department at the toll free number (888) 662-9888. Or you can request an RMA Number online at www.aoc.com/na-warranty. * This limited warranty does not cover any losses or damages that occur as a result of:...
Page 30
States, Alaska, and Hawaii. Outside the United States of America, this limited warranty is only valid for Products purchased in Canada. Information in this document is subject to change without notice. For more details, please visit: USA: http://us.aoc.com/support/warranty ARGENTINA: http://ar.aoc.com/support/warranty BOLIVIA: http://bo.aoc.com/support/warranty CHILE: http://cl.aoc.com/support/warranty...
EN 61000-3-3: 2008 Audix Technology(Shenzhen)CO.,LTD EN 55024: 1998+A1:2001+A2:2003 17019448 EN 60950-1: 2006+A11:2009 Tested by:TUV TPVRDSE- E2251FWu -EUP EN 62301: 2005 Tested by:TPV CE Mark first affixed in: 2011 The following importer/manufacturer is responsible for this declaration: TPV ELECTRONICS (Fujian) CO., LTD.
Page 32
*AOC will need to obtain a credit card number if you would like to get a new AOC monitor advanced shipped to your location, prior to the defective unit arriving at AOC’s service center. If you do not wish to supply a credit card, AOC will only ship the new monitor, once the defective unit arrives at the AOC service center.
Need help?
Do you have a question about the e2251Fwu and is the answer not in the manual?
Questions and answers