Ribbon Replacement - Amano MRX-35 Setup And Operation Manual

Ribbon Replacement

The Ribbon Cartridge (P/N CE-319250) should be replaced when the
imprint becomes too light.
To replace the ribbon:
1. Remove the Top Cover.
2. Unplug the power cord from the power source.
3. Flip the Display up as shown. Be careful not to touch the area
shown.
4. Using two fingers, press the two white release tabs down and
towards the case. While holding them, remove the ribbon.
5. Insert a new ribbon between the ribbon guide and the printer head.
4-2 MRX-35