Transfer A Call (M3903 And M3904) - Nortel Meridian M3901 User Manual

/
Transfer
To go back to the original call, if the
transfer is incomplete:

Transfer a call (M3903 and M3904)

Use the Transfer feature to redirect a call to a third party.
To use the Transfer feature:
Trans
Swap
or
Connect
While on an active call
3. When you hear the ring or a person
answers, press the
complete the call transfer.
The LED indicator goes from steady on
to off.
If the person you called is not
available: Press the
reconnect to the original call.
Note: On the Meridian SL-100, press the
Transfer Key, dial the number and press the
Goodbye Key. If you press the Transfer Key
the second time you get a three way
conference.
1. Press the
Transfer
The other party is on hold and you
receive a dial tone. The screen
displays Call on hold, dial number.
2. Dial the number of the telephone
where the call is to be transferred.
3. Press the Swap
talking with the original caller and the
new caller. Press the
complete the transfer.
The two callers are connected and
your telephone is ready to make or
receive new calls.
Transfer Key to
(DN) Key to
Line
Key.
Key to switch between
Key to
Connect
27