Selecting The Voice In The Quiet/Headphone Mode - Yamaha Disklavier E3 Operation Manual

Chapter
6
The Silent Piano™ Function

Selecting the Voice in the Quiet/Headphone Mode

[VOICE]
In the quiet or headphone mode, you can select the digital piano sound
(voice) that expresses various instruments to your preference.
The internal XG tone generator offers 480 instrumental voices and 11
drum kits for playing the keyboard.
1
Press [VOICE] on the remote control.
The voice selection screen appears, and the voice function is
activated.
2
Press [+/YES] and [–/NO] to select a voice group.
Changing the voice group displays the top voice of that group in the
voice parameters.
3
To change the voice, press [
voice parameter ("Voice"), then press [+/YES] and [–/NO].
If necessary, adjust the volume of the voice in the voice balance
setting screen.
4
To inactivate this function, press [VOICE] again.
50
VOICE [
Group 01<Piano
Voice 001<GrandPno>[XG ]
?=
=VOICE= -+
Group=02<ChromaticPerc>
Voice=040<Celesta >[XG ]
] to move the cursor to the
=VOICE=
Group=02<ChromaticPerc>
Voice=041<Glocken
-+
>
?=
-+
>[XG ]

For details on voice groups and
voices, see Chapter 13 "Internal
Tone Generator Voices" on
page 131.

See Chapter 4 "Advanced Song
Playback – Adjusting the Volume
Balance among the Keyboard
Playing, Ensemble Sound, and
Software Playback" on page 32.
Note:
The voice function is inactivated if
you escape from the voice selection
screen by other operations.