Table of Contents
Advertisement
Chapter 3
Using the System
Page 112
Control a Tuner or Amplifier
Only the buttons described here control a tuner or audio amplifier. Some of the
buttons described here may not control your tuner or amplifier. Please see the
user manual that came with your tuner or amplifier for more information.
AUX Mode Button
You must first set up the remote to control the device. See Set Up the Remote to
Control Devices, beginning on page 104. Then, you must press the AUX mode
button to set the remote to AUX mode. The AUX mode button flashes once to
show you've set the remote to AUX mode. Make sure you keep the remote in
AUX mode to control the device using the buttons described here.
Power Button
Press the blank POWER button to turn the tuner or audio amplifier on or off.
Mute Button
Press the MUTE button to turn the sound off or on.
Press the VOLUME button to raise (+) or lower (-) the audio volume.
Up and Down Arrow Buttons
Use UP and DOWN ARROW buttons to change channels on a tuner or audio
receiver.
Select Button
The SELECT button works as the INPUT SELECT button for the tuner or
audio amplifier/receiver.
Volume Button
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Receiver and is the answer not in the manual?
Questions and answers
what is autotune
Autotune in Dish Network receivers is a feature that allows the receiver to automatically switch to a specific channel at a scheduled time. It can be used to tune the receiver to a preferred program or channel without manual intervention. However, in some cases, autotune may force the receiver into sleep mode, depending on the settings and the type of channel selected.
This answer is automatically generated
why are most pictures so dark
Refer me to chapter to correct dark screens
To fix dark screens on a Dish Network receiver, follow these steps:
1. Reset the Receiver:
- Press and hold the POWER button on the receiver until the front panel lights blink.
- Release the POWER button and wait several minutes for the receiver to reset.
- The receiver will display “Acquiring Satellite Signal,” may download the Program Guide, and then return to normal programming.
2. Check Connections:
- Ensure all cables are securely connected to the receiver and TV.
- Verify that the TV is set to the correct input/source.
3. Check Signal Strength:
- Press MENU on the remote.
- Select System Setup > Installation > Point Dish to check signal strength.
- If the signal is weak or missing, adjust the dish or check for obstructions.
4. Check for On-Screen Messages:
- Look for error messages on the screen.
- Refer to the receiver’s on-screen message table to identify possible issues and solutions.
If the issue persists, contact Dish Network Customer Service for further assistance.
This answer is automatically generated