Download Print this page

Mute Button - Shure MX690 Quick Manual

Wireless desktop base/ wireless boundary microphone
Hide thumbs Also See for MX690:

Advertisement

Battery
Installation
1. Open the battery compartment as shown.
2. Insert two 1.5 V "AA" batteries. Make sure the +/– terminals are prop-
erly oriented.
Note: Alkaline batteries last up to 8 hours. Rechargeable, carbon-
zinc, and zinc-chloride batteries provide less operating time.
Power Meter
The battery meter on the LCD shows remaining battery life.
Low Power Indicator
Steady Red: Power low. Replace batteries immediately
Pulsing Red: Batteries dead. Transmitter cannot be turned on until
batteries are replaced.

Mute Button

The mute button can be configured for toggle or momentary operation.
Toggle (as supplied)
The PUSH button toggles the microphone between active and muted states.
Note: The microphone always powers up in the active state.
Momentary
There are two types of momentary operation:
Push-to-Mute: The microphone is muted only while the button is pressed
and held.
Push-to-Talk: The microphone is active only while the button is pressed
and held.
www.shure.com
United States, Canada, Latin
America, Caribbean:
Shure Incorporated
5800 West Touhy Avenue
Niles, IL 60714-4608 USA
Phone: 847-600-2000
Fax: 847-600-1212 (USA)
Fax: 847-600-6446
Email: info@shure.com
©2013 Shure Incorporated
To change between toggle and momentary:
Hold the PUSH button and press the SELECT button. (Test the microphone
to confirm the change.)
Hold
To change between push-to-talk and push-to-mute:
1. Set the button for momentary operation.
2. Hold the SELECT button and press the PUSH button.
Hold
Mute Indicator
MX890
The desktop base illuminates the gooseneck microphone LED to indicate
whether the microphone is active or muted. Refer to the following table:
MX890 Status Indicator
Microphone
MX405 / MX410
Status
Indicator
Active
Green
Muted
Red/Flashing Green*
*To toggle between off and flashing, press
MX690
The bi-color LED on the top of the microphone indicates whether the mi-
crophone is active or muted.
The LED can also be set to flash when muted.
MX690 Status Indicator
Display Mode
Steady (as supplied)
Flashing
Europe, Middle East, Africa:
Shure Europe GmbH
Jakob-Dieffenbacher-Str. 12,
75031 Eppingen, Germany
Phone: 49-7262-92490
Fax: 49-7262-9249114
Email: info@shure.de
MX405R / MX410R Light
Ring
Red
Off/Flashing*
PUSH
ON/OFF
and
simultaneously.
Status Indicator
Active = Green
Muted = Red
Active = Green
Muted = Flashing Green
Asia, Pacific:
Shure Asia Limited
22/F, 625 King's Road
North Point, Island East
Hong Kong
Phone: 852-2893-4290
Fax: 852-2893-4055
Email: info@shure.com.hk

Advertisement

loading
Need help?

Need help?

Do you have a question about the MX690 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Mx890