Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or trans-
lated in any language, in any form or by any means, except duplication of documentation
by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identifi ca-
tion or explanation and to the owners' benefi t, without intent to infringe.
Disclaimer:
Specifi cations and information contained in this guide are furnished for informational use
only and subject to change without notice, and should not be constructed as a commit-
ment by ASRock. ASRock assumes no responsibility for any errors or omissions that may
appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any kind,
either expressed or implied, including but not limited to the implied warranties or condi-
tions of merchantability or fi tness for a particular purpose. In no event shall ASRock, its
directors, offi cers, employees, or agents be liable for any indirect, special, incidental, or
consequential damages (including damages for loss of profi ts, loss of business, loss of
data, interruption of business and the like), even if ASRock has been advised of the pos-
sibility of such damages arising from any defect or error in the guide or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate"
ASRock Website: http://www.asrock.com
Published March 2012
Copyright©2012 ASRock INC. All rights reserved.
1
ASRock H77WS-DL Motherboard
Advertisement
Table of Contents
Related Manuals for ASROCK H77WS-DL
Summary of Contents for ASROCK H77WS-DL
-
Page 1: Copyright Notice
ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or condi- tions of merchantability or fi... -
Page 2: Motherboard Layout
PCI Express 2.0 x16 Slot (PCIE2, Blue) Chassis Intrusion Header (CHASSIS1, White) Clear CMOS Jumper (CLRCMOS1) Auxiliary Panel Header PCI Express 3.0 x16 Slot (PCIE1, Blue) (AUX_PANEL1, Black) Power Fan Connector (PWR_FAN1) SATA2 Connector (SATA2_5, Blue) Chassis Fan Connector (CHA_FAN1) ASRock H77WS-DL Motherboard... - Page 3 * There are two LED next to the LAN port. Please refer to the table below for the LAN port LED indications. LAN Port LED Indications ACT/LINK SPEED Activity/Link LED SPEED LED Status Description Status Description No Link 10Mbps connection Blinking Data Activity Orange 100Mbps connection Link Green 1Gbps connection LAN Port ASRock H77WS-DL Motherboard...
-
Page 4: Package Contents
In case any modifi cations of this manual occur, the updated version will be available on ASRock website without further notice. You may fi nd the latest VGA cards and CPU support lists on ASRock website as well. -
Page 5: Specifications
- Pixel Shader 5.0, DirectX 11 with Intel Ivy Bridge CPU. ® Pixel Shader 4.1, DirectX 10.1 with Intel Sandy Bridge CPU. - Max. shared memory 1760MB (see CAUTION 5) - Supports D-Sub with max. resolution up to 2048x1536 @ 75Hz ASRock H77WS-DL Motherboard... - Page 6 - CPU/Chassis/Power FAN connector - 24 pin ATX power connector - 8 pin 12V power connector - 3 x USB 2.0 headers (support 6 USB 2.0 ports) - 1 x USB 3.0 header (supports 2 USB 3.0 ports) ASRock H77WS-DL Motherboard...
- Page 7 64-bit / XP / XP 64-bit compliant (see CAUTION 16) Certifi cations - FCC, CE, WHQL - ErP/EuP Ready (ErP/EuP ready power supply is required) (see CAUTION 17) * For detailed product information, please visit our website: http://www.asrock.com ASRock H77WS-DL Motherboard...
- Page 8 ® Vista / XP. For Windows OS with 64-bit CPU, there is no such limita- tion. You can use ASRock XFast RAM to utilize the memory that Win- ® dows cannot use. Only PCIE1 slot supports Gen 3 speed. To run the PCI Express in Gen 3 speed, please install an Ivy Bridge CPU.
- Page 9 12. ASRock XFast RAM is a new function that is included into ASRock Ex- treme Tuning Utility (AXTU). It fully utilizes the memory space that cannot ®...
- Page 10 13. ASRock Crashless BIOS allows users to update their BIOS without fear of failing. If power loss occurs during the BIOS update process, ASRock Crashless BIOS will automatically fi nish the BIOS update procedure after regaining power. Please note that BIOS fi les need to be placed in the root directory of your USB disk.
-
Page 11: Screw Holes
Before you install or remove any component, ensure that the power is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components. ASRock H77WS-DL Motherboard... -
Page 12: Cpu Installation
Remove the PnP Cap (Pick and Place Cap). 1. It is recommended to use the cap tab to handle and avoid kicking off the PnP cap. 2. This cap must be placed if returning the motherboard for after service. ASRock H77WS-DL Motherboard... - Page 13 Step 4. Close the socket: Step 4-1. Flip the load plate onto the IHS. Step 4-2. Press down the load lever, and se- cure it with the load plate tab under the retention tab. ASRock H77WS-DL Motherboard...
-
Page 14: Installation Of Cpu Fan And Heatsink
Please be noticed that this motherboard supports Combo Cooler Option (C.C.O.), which provides fl exible options to adopt three dif- ferent CPU cooler types, Socket LGA 775, LGA 1155 and LGA 1156. The white throughholes are for Socket LGA 1155/1156 CPU fan. ASRock H77WS-DL Motherboard... -
Page 15: Installation Of Memory Modules (Dimm)
It is not allowed to install a DDR or DDR2 memory module into DDR3 slot; otherwise, this motherboard and DIMM may be dam- aged. Some DDR3 1GB double-sided DIMMs with 16 chips may not work on this motherboard. It is not recommended to install them on this motherboard. ASRock H77WS-DL Motherboard... -
Page 16: Installing A Dimm
DIMM if you force the DIMM into the slot at incorrect orientation. Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully snap back in place and the DIMM is properly seated. ASRock H77WS-DL Motherboard... -
Page 17: Installing An Expansion Card
Step 4. Align the card connector with the slot and press fi rmly until the card is completely seated on the slot. Step 5. Fasten the card to the chassis with screws. Step 6. Replace the system cover. ASRock H77WS-DL Motherboard... -
Page 18: Tm And Quad Crossfirex
AMD graphics card manuals for detailed installation guide. Step 1. Insert one Radeon graphics card into PCIE1 slot and the other Radeon graphics card to PCIE2 slot. Make sure that the cards are properly seated on the slots. ASRock H77WS-DL Motherboard... - Page 19 Connect the DVI monitor cable to the DVI connector on the Radeon graph- ics card on PCIE1 slot. (You may use the DVI to D-Sub adapter to convert the DVI connector to D-Sub interface, and then connect the D-Sub monitor cable to the DVI to D-Sub adapter.) ASRock H77WS-DL Motherboard...
-
Page 20: Driver Installation And Setup
You will fi nd “AMD Catalyst Control Center” on your Windows taskbar. AMD Catalyst Control Center Step 6. Double-click “ATI Catalyst Control Center”. Click “View”, select “CrossFi- ”, and then check the item “Enable CrossFireX ”. Select “2 GPUs” and click “Apply”. ASRock H77WS-DL Motherboard... - Page 21 AMD Technologies Inc., and is used only for identifi cation or explanation and to the owners’ benefi t, without intent to infringe. * For further information of AMD CrossFireX technology, please check AMD’s website for updates and details. ASRock H77WS-DL Motherboard...
-
Page 22: Surround Display Feature
4. Install the onboard VGA driver and the add-on PCI Express VGA card driver to your system. If you have installed the drivers already, there is no need to install them again. 5. Set up a multi-monitor display. ASRock H77WS-DL Motherboard... - Page 23 6. Use Surround Display. Click and drag the display icons to positions representing the physical setup of your monitors that you would like to use. The placement of display icons determines how you move items from one monitor to another. ASRock H77WS-DL Motherboard...
-
Page 24: Asrock Smart Remote Installation Guide
2.9 ASRock Smart Remote Installation Guide ASRock Smart Remote is only used for ASRock motherboard with CIR header. Please refer to below procedures for the quick installation and usage of ASRock Smart Remote. Step1. Find the CIR header located next to the USB 2.0 header on ASRock... - Page 25 The Multi-Angle CIR Receiver does not support Hot-Plug function. Please install it before you boot the system. * ASRock Smart Remote is only supported by some of ASRock motherboards. Please refer to ASRock website for the motherboard support list: http://www.asrock.com...
-
Page 26: Jumpers Setup
fi rst, and then shut it down before you do the clear-CMOS ac- tion. Please be noted that the password, date, time, user default profi le, 1394 GUID and MAC address will be cleared only if the CMOS battery is removed. ASRock H77WS-DL Motherboard... -
Page 27: Onboard Headers And Connectors
Besides four default USB 2.0 ports on the I/O panel, there are (9-pin USB4_5) three USB 2.0 headers on this (see p.2, No. 27) motherboard. Each USB 2.0 header can support two USB 2.0 ports. (9-pin USB6_7) (see p.2, No. 26) ASRock H77WS-DL Motherboard... - Page 28 Chassis Intrusion Header This motherboard supports CASE OPEN detection feature (3-pin CHASSIS1) that detects if the chassis cover (see p.2 No. 15) CASEOPEN +5VSB has been removed. This feature requires a chassis with chassis intrusion detection design. ASRock H77WS-DL Motherboard...
- Page 29 (see p.2, No. 16) internet status indicator and chassis intrusion pin. A. Front panel SMBus connecting pin (6-1 pin FPSMB) This header allows you to connect SMBus (System Management Bus) equipment. It can be used for communication between peripheral ASRock H77WS-DL Motherboard...
- Page 30 (see p.2, No. 35) CPU Fan Connectors Please connect the CPU fan FAN_SPEED_CONTROL CPU_FAN_SPEED cable to the connector and (4-pin CPU_FAN1) +12V match the black wire to the (see p.2, No. 3) ground pin. 1 2 3 4 ASRock H77WS-DL Motherboard...
- Page 31 4-pin ATX 12V power supply. To use the 4-pin ATX power supply, please plug your power supply along with Pin 1 and Pin 5. 4-Pin ATX 12V Power Supply Installation Serial port Header This COM1 header supports a serial port module. (9-pin COM1) (see p.2, No. 30) ASRock H77WS-DL Motherboard...
-
Page 32: Raid Functions
B. Set the option “SATA Mode Selection” to [IDE]. (For SATA2_2 to SATA2_5, SATA3_0 and SATA3_1 ports.) Set the option “ASMedia SATA3 Mode” to [IDE]. (For SATA3_A0 and SATA3_A1 ports.) ® STEP 2: Install Windows XP / XP 64-bit OS on your system. ASRock H77WS-DL Motherboard... -
Page 33: Without Raid Functions
B. Set the option “SATA Mode Selection” to [AHCI]. (For SATA2_2 to SATA2_5, SATA3_0 and SATA3_1 ports.) Set the option “ASMedia SATA3 Mode” to [AHCI]. (For SATA3_A0 and SATA3_A1 ports.) ® STEP 2: Install Windows 7 / 7 64-bit / Vista / Vista 64-bit OS on your system. ASRock H77WS-DL Motherboard... -
Page 34: Teaming Function Operation Guide
When installing teaming driver, system will show below warming message. Please choose Continue Anyway and keep installing driver. 2. After installing driver, please open Teaming Utility in Programs. (Start > Programs > Realtek > Teaming Utility) 3. Click Teaming item and then press Create Team button. ASRock H77WS-DL Motherboard... - Page 35 OK button, system will show below warming message. Please choose Continue Anyway.) 6. After doing above settings, system will auto create a new Local Area Connection. 7. Reboot your system. Then, you will fi nd the Speed column of new Local Area Connection show 2.0Gbps. ASRock H77WS-DL Motherboard...
- Page 36 2. After installing driver, please open Teaming Utility in Programs. (Start > Programs > Realtek > Teaming Utility) 3. Click Teaming item and then press Create Team button. 4. Key in Team Name and choose Link Aggregation \ LACP (802.3ad) for Settings. ASRock H77WS-DL Motherboard...
- Page 37 OK button, system will show below warming message. Please choose Continue Anyway.) 6. After doing above settings, system will auto create a new Local Area Connection. 7. Reboot your system. Then, you will fi nd the Speed column of new Local Area Connection show 2.0Gbps. ASRock H77WS-DL Motherboard...
-
Page 38: Bios Information
It will display the Main Menu automatically if “AUTORUN” is enabled in your computer. If the Main Menu does not appear automatically, locate and double-click on the fi le “ASSETUP.EXE” from the BIN folder in the Support CD to display the menus. ASRock H77WS-DL Motherboard... - Page 39 1. 主板簡介 謝謝你采用了華擎 H77WS-DL 主板 , 本主板由華擎嚴格制造 , 質量可靠 , 穩定性好 , 能夠獲得卓越的性能。本安裝指南介紹了安裝主板的步驟。更加詳細的主板信息可參 看驅動光盤的用戶手冊。 由于主板規格和 BIOS 軟件將不斷升級 , 本手冊之相關內容變更恕不另行 通知。請留意華擎网站上公布的升級版本。你也可以在華擎網站找到最新 的顯卡和 CPU 支持表。 華擎网址：http://www.asrock.com 如果您需要與此主板有關的技術支持 , 請參觀我們的網站以了解您使用機 種的規格信息。 www.asrock.com/support/index.asp 1.1 包裝盒內物品 華擎 H77WS-DL 主板 (ATX 規格 : 12.0 英吋 X 9.6 英吋 , 30.5 厘米 X 24.4 厘米 ) 華擎...
- Page 40 - 最大共享內存 1760MB（見警告 5） - 支持 D-Sub, 最高分辨率達 2048x1536 @ 75Hz 板載 LAN 功能 - PCIE x1 Gigabit LAN 10/100/1000 Mb/s - Realtek RTL8111E - 支持网路喚醒（Wake-On-LAN） - 支持網路線偵測功能 - 支持 Energy Efficient Ethernet 802.3az - 支持雙 LAN 整合功能 ASRock H77WS-DL Motherboard...
- Page 41 - 64Mb AMI UEFI Legal BIOS, 支持 GUI - 支持即插即用（Plug and Play,PnP） - ACPI 1.1 電源管理 - 支持 jumperfree 免跳線模式 - 支持 SMBIOS 2.3.1 - CPU Core, IGPU, DRAM, 1.8V PLL, VTT, VCCSA 電壓多功能 調節器 支持光盤 - 驅動程序 , 工具軟件 , 殺毒軟件（測試版本 ) ASRock H77WS-DL Motherboard...
- Page 42 獨家功能 - ASRock Extreme Tuning Utility (AXTU)（詳見警告 6） - 華擎即時開機功能 - 華擎 Instant Flash（見警告 7） - 華擎 APP Charger（見警告 8） - 華擎 SmartView（見警告 9） - 華擎 XFast USB（見警告 10） - 華擎 XFast LAN（見警告 11） - 華擎 XFast RAM（見警告 12） - 華擎 Crashless BIOS（見警告 13）...
- Page 43 Express 只能運行于 Gen 2 速度。 ® 5、 最大共享內存大小由芯片組廠商定義並且可以更改。請查閱 I n t e l 網站 了解最新資訊。 6、 ASRock Extreme Tuning Utility (AXTU) 是一個多合一的工具，可在用戶 友好的界面中微調不同的系統功能，包括硬件監控、風扇控制、超頻、O C DNA 和 IES。在 Hardware Monitor（硬件監控）中，顯示系統的主要參數。 在 Fan Control（風扇控制）中，顯示風扇速度和溫度，以便您進行調整。 在 Overclocking（超頻）中，您可以對 CPU 進行超頻，以优化系統性能。 在 OC DNA 中，您可以將自己的 OC 設置保存為配置文件，并与您的朋友共...
- Page 44 存在差异。 11、 華擎 XFast LAN 可提供更快的网絡訪問，包括以下諸多好處。网絡應用程 序优先級：您可以設置理想的應用程序优先級，并可以添加新程序。游戲 更少延遲：將在線游戰設置為較高的优先級，可降低游戰中的延遲。流量 定形：您可以在觀看 Youtube 高清視頻的同時進行文件下載。實時分析您 的數据：通過狀態窗口，您可以清楚地看到目前正在傳輸的是哪個數据流。 12、華擎 XFast RAM 是 ASRock Extreme Tuning Utility (AXTU) 中加入的一項 新功能。它能充分利用 Windows ® 操作系統 32-bit CPU 無法使用的內存空 間。華擎 XFast RAM 可縮短之前訪問過的网站的加載時間，從而加快网絡 衝浪速度。此外，它還能提升 Adobe Photoshop 運行的速度高達五倍之多。 華擎 XFast RAM 的另一項优勢是它能減少訪問 SSD 或 HDD 的頻次，從而延...
- Page 45 線帽將 C L R C M O S1 上的插針 2 和插針 3 短接 5 秒。但是，請勿在更新 B I O S 后 立即清除 C M O S。如果需要在更新 B I O S 后立即清除 C M O S，必須在執行 C M O S 清除操作之前，先啟動然后關閉系統。請注意，只有取出 C M O S 電池，密碼、 日期、時間、用戶默認配置文件、1394 GUID 和 MAC 地址才會被清除。 ASRock H77WS-DL Motherboard...
- Page 46 三組 USB 2.0 接針。 每組 USB 2.0 ( 見第 2 頁第 27 項 ) 接針可以支持兩個 USB 2.0 接 口。 (9 針 USB6_7) ( 見第 2 頁第 26 項 ) USB_PWR (9 針 USB8_9) ( 見第 2 頁第 25 項 ) DUMMY USB_PWR ASRock H77WS-DL Motherboard...
- Page 47 CASEOPEN +5VSB 能需機箱具備機箱開啟偵測設 ( 見第 2 頁第 15 項 ) 計。 系統面板接頭 這個接頭提供數個系統前面板功 能。 (9 針 PANEL1) ( 見第 2 頁第 14 項 ) 根據下面的針腳說明連接機箱上的電源開關、重啟按鈕與系統狀態指示燈 到這個排針。根據之前請注意針腳的正負極。 PWRBTN( 電源開關 ): 連接機箱前面板的電源開關。您可以設置用電源鍵關閉系統的方式。 RESET( 重啟開關 ): 連接機箱前面板的重啟開關。當電腦死機且無法正常重新啟動時 , 可按下 重啟開關重新啟動電腦。 ASRock H77WS-DL Motherboard...
- Page 48 A. 前面板 SMBus 連接排針（6-1 pin FPSMB） 本排針可讓您連接 SMBus（系統管理總線）設備。它可用于傳輸速度較低 的系統外圍設備与電源管理設備之間的通訊。 B. 互聯网狀態指示燈（2-pin LAN1_LED、LAN2_LED） 這兩個 2-pin 排針可讓您使用千兆网絡指示燈連接線來連接 LAN 狀態指示 燈。當指示燈閃爍時，代表网絡已正确連接。 C. 机箱開啟警告功能排針（4-1 pin CHASSIS） 此排針需具備机箱開啟偵測設計的電腦机箱才能使用。此外還需要連接外 接偵測設備才能工作，如机箱開啟偵測傳感器或微型開關。當此功能開啟 時，如果机箱元件發生移動，傳感器會立即偵測到并發送信號到此排針， 然后系統將會記錄這次机箱開啟事件。默認情況下本接針設置為 CASEOPEN 与 GND 針腳，此功能關閉。 機箱喇叭接頭 請將機箱喇叭連接到這個接頭。 (4 針 SPEAKER1) ( 見第 2 頁第 12 項 ) ASRock H77WS-DL Motherboard...
- Page 49 連接到此主板的 CPU 風扇接口 , 請將它連接到 Pin 1-3。 Pin 1-3 連接 3-Pin 風扇的安裝 (3 針 CPU_FAN2) ( 見第 2 頁第 4 項 ) +12V CPU_FAN_SPEED ATX 電源接頭 請將 ATX 電源供應器連接到這個 接頭。 (24 針 ATXPWR1) ( 見第 2 頁第 7 項 ) ASRock H77WS-DL Motherboard...
- Page 50 雖然此主板提供 8-pin ATX 12V 電源接口 , 但是您仍然可以使用傳統的 4-pin ATX 12V 電源。為了使用 4-pin ATX 12V 電源 , 請順著 Pin 1 和 Pin 5 插上電 源接頭。 4-Pin ATX 12V 電源安裝說明 串行接口連接器 這個 COM1 端口支持一個串行接 口的外設。 (9 針 COM1) ( 見第 2 頁第 30 項 ) ASRock H77WS-DL Motherboard...
- Page 51 進行常規檢驗。如果你需要在開機自檢 ( P O S T ) 之后進入 B I O S 設置程序，請按下 <Ctrl>+<Alt>+<Delete> 鍵重新啟動電腦，或者按下系統面板上的重啟按鈕。有關 BIOS 設置的詳細信息，請查閱隨機支持光盤裡的用戶手冊 (PDF 文件 )。 3. 支持光盤信息 本主板支持各種微軟視窗操作系統：Microsoft ® Windows ® 7/7 64 位元 /Vista Vista 64 位元 /XP/XP 64 位元。主板隨機支持光盤包含各種有助于提高主板效能的 必要驅動和實用程序。請將隨機支持光盤放入光驅裡，如果電腦的“自動運行”功能 已啟用，屏幕將會自動顯示主菜單。如果主菜單不能自動顯示，請查找支持光盤內 BIN 文件夾下的“ASSETUP.EXE”，并雙擊它，即可調出主菜單。 ASRock H77WS-DL Motherboard...
- Page 52 若您慾了解此產品的有毒有害物質或元素的名稱及含量說明，請參照以下表格及說 明。 有害物質或元素 部件名稱 鉛 (Pb) 鎘 (Cd) 汞 (Hg) 六价鉻 (Cr(VI)) 多溴聯苯 (PBB) 多溴二苯醚 (PBDE) 印刷電路板 及電子組件 外部信號連 接頭及線材 O: 表示該有毒有害物質在該部件所有均質材料中的含量均在 SJ/T 11363-2006 標準規定 的限量要求以下。 X: 表示該有毒有害物質至少在該部件的某一均質材料中的含量超出 SJ/T 11363-2006 標準 規定的限量要求，然該部件仍符合歐盟指令 2002/95/EC 的規範。 備註 : 此產品所標示之環保使用年限，系指在一般正常使用狀況下。 ASRock H77WS-DL Motherboard...
- Page 53 (“xxx” is the device which contains your Windows installation fi les. Normally it is an optical drive.) You can also press <F11> to launch boot menu at system POST and choose the item “UEFI:xxx“ to boot. ® 4. Start Windows installation. ASRock H77WS-DL Motherboard...
-
Page 54: Installing Os On A Hdd Larger Than 2Tb In Raid Mode
RAID drivers into a USB fl ash disk. You can download the driver from ASRock's website and unzip the fi le into a USB fl ash disk OR copy the fi le from ASRock motherboard support CD. (please copy the fi les under following directory: 32 bit: ..\i386\Win7_Vista_Intel.. - Page 55 Microsoft 's suggested solution: A. Disable System Restore. a. Type “systempropertiesprotection” in the Start Menu. Then press "Enter". b. De-select Local Disks for System Restore. Then Click “Turn System Restore Off” to confi rm. Then Press “Ok”. ASRock H77WS-DL Motherboard...
- Page 56 B. Disable “Volume Shadow Copy” service. a. Type “computer management” in the Start Menu, then press “Enter”. b. Go to “Services and Applications>Services”; Then double click “Volume Shadow Copy”. ASRock H77WS-DL Motherboard...
- Page 57 (This may take a long time; >30 mins.) C. Reboot your system. (It may take about 5 minutes to reboot.) ® D. Windows will install this hotfi x then reboot by itself. E. Please start to install motherboard drivers and utilities. 6. Finish. ASRock H77WS-DL Motherboard...
Need help?
Do you have a question about the H77WS-DL and is the answer not in the manual?
Questions and answers