Honeywell HMAX082 Owner's Operation Manual page 80

8.3.6 Monitor Partitioning, Continued
2. Enter data as desired in the fields.
Keyboard (Monitor 1/Monitor 2) – define which keyboard controls the monitor.
Camera 1-16 Displayed – Point to the down arrow and select YES or NO. Yes
allows the camera to be displayed on the monitor; No prevents the camera from
being displayed on the monitor. In the default configuration, all cameras can be
displayed on both monitors.
3. Click on Save to save any changes you have made.
Rev. 1
The Monitor Partitioning window is displayed. Note: if there is only one monitor
in the system, Monitor 2 is not displayed.
There are several buttons on the bottom of the window to assist the user.
Send – After editing the fields, click on the Send button to transmit the
configuration to the MaxCom Gold.
Receive – To transmit the current configuration for monitor partitioning stored in
a MaxCom Gold to the PC configuration utility, click on the receive button.
Reload – To return the screen to the default configuration or to the configuration
prior to any changes made in this editing session, press the Reload button.
Save – After editing, click on Save to save your changes.
68 900.0560
18-July-2005