Page 1
OPERATORS MANUAL ROTARY EMPATH DJ MIXER LEFT RIGHT PHONO PHONO PHONO INPUT 1-2-3 LINE LINE LINE GAIN GAIN GAIN AUTO-GAIN MIC ENGAGE MAIN HIGH HIGH HIGH MAIN BOOTH AUX OUT SPLIT CUE MASTER POST POST POST AUX IN LEVEL PHONES...
Page 2
3 fully equipped stereo input channels 1 / 2 / 3 PHONO • One Phono and one Line Input for each channel. ° Be sure to connect each turntable ground to the Phono GND terminal. LINE GAIN ° PHONO/LINE source switch selects the Input for each channel. •...
° Do not spray lubricant on the slide mechanism — Apply a drop of silicone lubricant directly on rod. ° When in doubt, give Rane a call: 425-355-6000. ° Failure to follow these simple instructions may affect the performance of the pot and will void the warranty.
Mic Input • Balanced ¼" TRS input (Tip (+), Ring (–), Sleeve (ground) • Accepts unbalanced ¼" TS (Tip-Sleeve) plugs. INPUT 1-2-3 • Mic Engage switch turns the Mic on and off without changing the Mic level. ° Green indicator lights when engaged. •...
Level Meters • Level Meters have two modes of operation: LEFT RIGHT ° Stereo Main output ° Cue Monitor. • Meter mode switch set to MAIN “out”: ° Meter displays the level at the Main output, after the Main output LEVEL control. •...
Page 6
POST POST POST CD1 TRIGGER CD2 TRIGGER CD Triggers • The Empath mixer provides two CD triggers: ° CD1 TRIGGER switch determines trigger source —› Input Fader 1 is the source —› No trigger —› A-side Crossfader is the source °...
Page 7
Cleaning of the unit is necessary if it is used in dirty or dusty environments or if contaminants have reached inside. The fader must be removed from the panel before servicing. Spare Part Description Penny & Giles Part No. Rane Part Number PGFX3000 D460621 12206 (shown right) Instructions 4.
Need help?
Do you have a question about the ROTARY EMPATH and is the answer not in the manual?
Questions and answers