Advertisement
Nokia original rechargeable battery
models. The number is printed at the
bottom of each slot.
To select slot 2 if slot 1 is visible,
rotate the cover to the left (6). To
select slot 1 if slot 2 is visible, rotate
the cover to the right (7).
Slot 1 is intended for use with the
following batteries: BL-4B, BL-4CT,
BL-4D, BL-4J, BL-4S, BL-4U, BL-5BT,
BL-5CT, BL-5F, BL-5J, BL-5K, BL-6F,
BL-6P, BL-6Q, BP-4L, BP-5M, and
BP-6MT.
Slot 2 is intended for use with the
following batteries: BL-4C, BL-5B,
BL-5C, BL-5CA, BL-5CB, and BL-6C.
Charge the battery
1. Place the stand on a stable, flat
surface. Connect the charger to the
stand and to a wall outlet.
The indicator light flashes once.
2. Place the battery into the stand
from the top (8) so that the battery
and stand connectors are aligned.
The indicator light is displayed
during charging.
3. When the battery is fully charged,
the indicator light turns off.
Remove the battery from the slot
from the top, and disconnect the
charger from the stand, then from
the wall outlet.
When you unplug a charger, grasp
and pull the plug, not the cord.
Troubleshooting
If the battery that you placed into the
stand is fully charged, the indicator
light flashes twice, and charging does
not start.
If the battery is damaged or the
battery temperature is too low or too
high, the indicator light flashes
quickly, and charging does not start.
ENGLISH
Advertisement
