Setting The Alarm - Philips HF3505 User Manual

FM
Switching the FM radio on/off
Press the FM on/off button to switch on the FM radio. The current radio frequency is shown in the display for 5 seconds,
before clock time is shown again. To scan radio frequencies automatically, press and hold the arrow buttons for approx.
2 seconds. To set the volume level, press the volume increase or decrease button. You can choose a volume level between
1 and 10.
1 2
4
Tip: To get a good radio signal, fully unwind antenna and move it around until you receive the best reception.
3

Setting the alarm

Press the alarm button if you want to switch the alarm on or off. The alarm symbol appears on the display when you switch
on the alarm. It disappears when you switch off the alarm. When you switch on the alarm, the hour indication starts to blink
and you can adjust the alarm time.
2
1
4
Note:
Press the Alarm button to confirm set alarm time or wait 5 seconds.
3