Table of Contents
Advertisement
SETTING THE TIME:
TIME SYNC & MANUAL
TIME SETTING
TIME SYNC
This unit is equipped with auto sync. By default, the unit will sync to the
time on your iPhone or newer iPod (iPod touch, iPod nano and iPod
Classic; older iPod models such as iPod mini do not support this feature)
whenever you dock it in the Lightning dock OR connect via the USB port
located on back of the unit. During time sync, "SYNC" will flash on the
display, indicating attempted time sync. When successful, the updated
time will appear on the display. If sync is unsuccessful, try to sync again
using a different iPhone or iPod. If sync still doesn't work, set the time
manually (see below).
SETTING THE TIME MANUALLY
1.
Press and hold the Time Set Button until "MAN" or "SYNC" flashes in the
display with one beep. If "SYNC" is displayed, press the + or – Buttons so
"MAN" appears in the display, indicating manual time setting mode.
2. Press and release the Time Set Button. The time will flash in the display.
3. Press the + or – Buttons to set the correct time (hold for rapid adjustment.
Make sure you are setting the time to the correct AM or PM time. The PM
indicator appears at the upper left of the display; there is no AM indicator.
NOTE: The time can be set to standard 12 hour time (AM and PM) or to 24
hour time (sometimes called "military time"). To toggle between 12 and 24
modes, press and release the
any time during manual time setting mode.
4. Press and release the Time Set Button to confirm the current time setting
(two beeps will sound) and exit time setting mode.
Alarm Button located on top of the unit at
5
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the iHome iPL8 and is the answer not in the manual?
Questions and answers
I’m trying to sync the time on my clock and my clock flashes sync/man. and when it’s done flashing it stays the same time?
To sync the time on your iHome iPL8 clock, dock your iPhone or compatible iPod (iPod touch, iPod nano, or iPod Classic) in the Lightning dock or connect it via the USB port on the back of the unit. During syncing, "SYNC" will flash on the display. If the sync is unsuccessful, try using a different iPhone or iPod. If it still does not work, you can set the time manually by pressing and holding the Time Set Button until "MAN" or "SYNC" flashes on the display.
This answer is automatically generated