Telnet Configuration - Switzernet A-100 User Manual

A-100 SIP Phone User Manual (V1.39)

Telnet Configuration

● On the PC choose Start>Run, and then type telnet 192.168.1.100 into
Run field in popuping Run dialog. Or input telnet 192.168.1.100 in the
DOS window. Then the following information will be displayed.
A-100 V1.39 settings
Password :
Then please type password. With debug is set as 0[disable], if type ordinary
password (default one is 1234), after Retun, you will see：
Password : ****
P:\>
If you type super password, then you will see:
Password : ********
P:\>
Above information indicates that IP phone is under setting mode, and then you
can set the A-100 IP phone by using the telnet commands.
A-100 Telnet Commands Explanation
A-100 Telnet Commands
Command
?
get
set
store
load
Exit from the setting mode without saving the configuration
exit
write
ping
The phone connects to FTP server and then get the files
ftp
Detail description of A-100 Telnet commands
Supply command name and parameters
Display basic parameters of the A-100 IP phone
Set parameters of the A-100 IP phone
Save current settings to designated position
Load designated settings to current position
Exit with saving all configurations and restart A-100
Ping other net parameter
Function
22