External Component Names And Functions; Front - Fujitsu FX-3001SR User Manual

1.1. External Component Names and Functions

1
1.1.1
(6) CompactFlash slot
(1) Power switch
(1) Power switch
The switch for turning the device power ON and OFF.
(2) DIP switch
The following settings are available by flipping the switches to ON/OFF.
After changing the DIP switches, restart the product for the settings to take
effect.
SERVIS IP-Serial
2
1p Converter
User's Guide

Front

(Shown: advanced version FX-3001SRF)
(2) DIP switch
Dip switch ON
1: Boot Mode Self-diagnostic mode
2: CF boot CF boot mode
3: reserve - (reserved)
4: DHCP DHCP or PNP enabled
5: Duplex Ethernet comm. mode: Full
Duplex
6: 10/100M Ethernet comm. speed 100M
7: Auto Nego Auto-negotiation enabled
(DIP switches 5 & 6 disabled
when 7 enabled)
8: reserve - (reserved)
(5) RESET button
(4) Init button
(3) Status LED
OFF
Normal startup mode
Normal startup mode
- (reserved)
Internal settings enabled
Ethernet comm. mode: Half
Duplex
Ethernet comm. speed 10M
DIP switches 5 & 6 enabled
- (reserved)
Default
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF