Table of Contents
Advertisement
Passenger-side
tunnel
Mounting
Legs/Plates
Rear housing extension plate (Not Shown)
Attach in subassembly to Main Housing Floor
INSTALLATION:
1. REMOVE INTERIOR:
• Remove rear seats and seat belts.
• Remove top, side, and bottom plastic rear trim caps
2. REMOVE REAR OEM DOOR PANELS:
• Remove speaker, door handle, and lock
• Remove switch assembly from plastic housing (leave plug on switch)
Note: If vehicle has electric door locks the wire plug must be reattached to the switch. The switch
assembly must then be wired tired inside the door so it does not interfere with window or door
latch operations. It is also recommended to place the switch into a re-sealable plastic bag to
protect the switch from moisture.
Main housing
2
32" K9
Switch box
Driver-side
tunnel
KK-K9-C14-K-32_INST_12-08
Advertisement
Table of Contents
Need help?
Do you have a question about the KK-K9-C14-K-32 and is the answer not in the manual?
Questions and answers