Table of contents Introduction Alarm About this handbook........5 Principle of operation......41 Symbols glossary........5 Arming the alarm........43 Parts and accessories......6 Disarming the alarm........43 Quick start Steering wheel Quick start..........9 Adjusting the steering wheel....44 Audio control...........44 Child safety Wipers and washers Child seats..........18 Booster cushions........19 Windscreen wipers.........46 Child seat positioning......20...
Page 4
Table of contents Auto-dimming mirror......74 Cup holders..........127 Rear quarter windows......74 Glove box..........127 Storage compartments......128 Instruments Map pockets..........130 Gauges.............76 Seat back trays........130 Warning lamps and indicators....78 Glasses holder........131 Audible warnings and indicators..80 Memory function........131 Childminder mirror.........132 Information displays CD changer..........132 General information.........81 Auxiliary input (AUX IN) socket....132 Trip computer..........90 USB port..........133...
Page 5
Table of contents Roof racks and load carriers....174 Brakes Load retaining fixtures......175 Principle of operation......147 Dog guard..........178 Hints on driving with ABS......147 Parking brake.........147 Towing Electric parking brake (EPB)....148 Towing a trailer........181 Detachable tow ball.......181 Stability control Retractable tow ball......184 Principle of operation......151 Using stability control......151 Driving hints...
ABOUT THIS HANDBOOK indicate that an individual’s exposure can be reduced but this does not mean that Thank you for choosing Ford. We an individual’s allergic symptoms will recommend that you take some time to necessarily diminish. Allergy UK’s opinion...
PARTS AND ACCESSORIES Now you can be sure that your Ford parts are Ford parts Your Ford has been built to the highest standards using high quality Ford Original Parts. As a result, you can enjoy driving it for many years.
Page 12
Quick start Instrument panel overview - right-hand drive E75798 Lighting controls. See Lighting control (page 51). Air vents. See Air vents (page 102). Direction indicators. See Direction indicators (page 56). Telephone control buttons. See Telephone controls (page 245). Voice control buttons. See Using voice control (page 250).
Page 13
Quick start Information display controls. See Information displays (page 81). Wiper lever. See Windscreen wipers (page 46). Audio or navigation unit. See separate handbook. Stability control (ESP) switch. See Using stability control (page 151). Parking aid switch. See Using the parking aid (page 156). Hazard warning flasher switch.
Page 14
Quick start Electric folding mirrors E95178 E72623 See Electric exterior mirrors (page 72). Reverse mirror dipping Depending on the selected mirror position, the relevant exterior mirror will dip whenever you select reverse gear, giving you a view of the kerb. E95179 When you first use this feature, the mirrors will dip to a preset position.
Page 15
Quick start Information displays Direction indicators E70499 E70727 Note: Tap the lever up or down to make Use the arrow buttons to navigate the direction indicators flash only three through the menus and press OK to times. make a selection. Autowipers See Information displays (page 81).
Page 16
Quick start 2. Adjust the seat and exterior mirrors to the desired position. 3. Press and hold the desired pre-set button B until a single chime sounds to confirm. See Memory function (page 131). Manual climate control Heating the interior quickly E70316 High sensitivity Low sensitivity...
Page 17
Quick start Rear seat air vents Defrosting and demisting the windscreen E71382 See Manual climate control (page 103). Automatic climate control E70304 See Automatic climate control (page 106). E73131 Air flow through lower air vent Air flow through upper air vent Upper air vent Select position B to defrost or demist the rear side windows.
Page 18
Quick start Manual transmission Drive Selecting reverse gear Manual shifting and sport mode WARNING Apply the brakes before moving the selector lever and keep them applied until you are ready to move off. See Automatic transmission (page 144). Electric parking brake (EPB) E99067 Applying the EPB On some vehicles it is necessary to raise...
Page 19
Quick start Automatic release - Drive away release (DAR) Engage first or reverse gear, move off as normal, the EPB will be released automatically. See Electric parking brake (EPB) (page 148).
Child safety Only child restraints certified to CHILD SEATS ECE-R44.03 (or later) have been tested and approved for use in your vehicle. A choice of these are available from your Dealer. Child restraints for different mass groups Use the correct child restraint as follows: Baby safety seat E68916 WARNINGS...
Child safety Child safety seat CAUTION When using a child seat on a rear seat, make sure that the child seat rests tightly against the vehicle seat. It may be necessary to lift or remove the head restraint. See Head restraints (page 118).
22 - 36 kg Seating positions Child Booster seat or Baby safety seat safety cushion seat Front passenger seat UF¹ UF¹ UF¹ with airbag ON Front passenger seat U¹ U¹ U¹ U¹ U¹ with airbag OFF Second row seats Third row Galaxy...
Page 23
Child safety Mass group categories Up to 10 Up to 13 9 - 18 kg 15 - 25 kg 22 - 36 kg Seating positions Child Booster seat or Baby safety seat safety cushion seat Third row S-MAX L, UF L, UF X Not suitable for children in this mass group.
Page 24
Child safety IU Suitable for universal category ISOFIX child restraints approved for use in this mass group. As defined by ECE-R16. Note: When you are purchasing an ISOFIX restraint, make sure that you know the correct mass group and ISOFIX size class for the intended seating locations.
Child safety Attaching a child seat with top ISOFIX ANCHOR POINTS tethers WARNING WARNING Use an anti-rotation device when Do not attach a tether strap to using the ISOFIX system. We anything other than the correct recommend the use of a top tether tether anchor point.
Occupant protection Driver and front passenger airbags PRINCIPLE OF OPERATION Airbags WARNINGS Do not modify the front of your vehicle in any way. This could adversely affect deployment of the airbags. Original text according to ECE R94.01: Extreme Hazard! Do not use a rearward facing child restraint on a seat protected by an airbag in front of Wear a seat belt and keep sufficient...
Page 28
Occupant protection For item location: See Quick start (page Curtain airbags Note: The knee airbag has a lower deployment threshold than the front airbags. During a minor collision, it is possible that only the knee airbag deploys. Side airbags E75004 Curtain airbags are fitted inside the trim panels over the front and rear side windows.
Occupant protection WARNINGS Do not use a seat belt that is slack or twisted. Do not wear thick clothing. The seat belt must fit tightly around your body to achieve its optimum effect. Position the shoulder strap of the seat belt over the centre of your shoulder and position the lap strap tightly across your hips.
Occupant protection Second row centre seat belt E74128 1. Press the button on the side of the black buckle to release the belt. Let it retract completely and smoothly to the retractor in the roof. 2. Insert the larger tongue into the pocket near the end of the seat belt.
Occupant protection SEAT BELT REMINDER WARNING Position the seat belt correctly for WARNING your safety and that of your unborn child. Do not use only the lap strap Do not sit on top of a fastened seat or the shoulder strap. belt to prevent the seat belt reminder from coming on.
Page 32
Occupant protection Fitting the passenger airbag Enabling the passenger airbag deactivation switch WARNING WARNING Make sure that the passenger If you need to fit a child restraint on airbag is enabled when you are not using a child restraint on the front a seat protected by an operational passenger seat.
Keys and remote controls Programming a new remote USING THE KEY control Remote control with flip key 1. Insert the key in the ignition. blade 2. Cycle the key from position 0 to II and then back to 0 four times in quick succession (about once a second).
Keys and remote controls CHANGING THE REMOTE CONTROL BATTERY Remote control with a folding key blade E74385 3. Twist the screwdriver in the position shown to separate the two halves of the remote control. CAUTION E74383 Do not touch the battery contacts or the printed circuit board with the 1.
Page 35
Keys and remote controls Remote control without a Type 2 folding key blade Type 1 E78284 1. Slide the release slider in the direction of the arrow. E74386 2. Remove the key blade. 1. Insert a screwdriver into the recess on the back of the key and remove the key blade.
Page 36
Keys and remote controls 4. Carefully prise out the battery with the CAUTION screwdriver. Do not touch the battery contacts or 5. Install a new battery (3V CR 2032) with the printed circuit board with the the + facing downwards. screwdriver.
Locks When you lock the doors, the direction LOCKING AND UNLOCKING indicators will flash twice. Central locking Note: The direction indicators will flash twice as soon as you activate central You can only centrally lock the doors if locking. They will not flash again when you they are all closed.
Page 38
Locks Locking and unlocking the Locking and unlocking the doors and the luggage doors from inside compartment lid with the Driver's door remote control E87379 Unlock Lock Luggage compartment lid unlock E71958 Locking the doors and the luggage compartment lid with the remote Lock all doors control Unlock all doors...
Locks Luggage compartment lid A recessed grip is incorporated inside the luggage compartment lid to facilitate Opening the luggage compartment closing. Automatic relocking The doors will relock automatically if you do not open a door within 45 seconds of unlocking the doors with the remote control.
Page 40
Locks Global opening E71956 To close all the windows, press and hold E71955 the lock button for at least three To open all the windows, press and hold seconds. Press any button again to stop the unlock button for at least three the closing function.
Page 41
Locks To close all the windows, press and hold the button on the driver’s door handle for at least two seconds. The anti-trap function is also active during global closing.
If you lose a key, you can obtain a replacement from your Ford Dealer. If possible, provide them with the key number from the tag provided with the original keys. You can also obtain additional keys from your Ford Dealer.
Alarm Battery back-up sounder PRINCIPLE OF OPERATION The battery back-up sounder is an extra Alarm system alarm system which will sound a siren when the alarm is triggered. It is armed Your vehicle may be equipped with one directly when you lock the vehicle. The of the following alarm systems: sounder has its own battery and will •...
Page 44
Alarm Any further attempts to perform one of Selecting full or reduced guard the above will trigger the alarm again. Note: Selecting Reduced does not set the alarm permanently to reduced guard. Full and reduced guard It sets it to reduced guard only for the current ignition cycle.
Alarm 4. Highlight Reduced or Full guard. If you prefer to be asked each time you switch off the ignition, select Ask on Exit. 5. Press the OK button to confirm the selection. 6. Press the left arrow button to exit the menu.
Steering wheel ADJUSTING THE STEERING WARNING WHEEL Make sure that you fully engage the locking lever when returning it to its original position. WARNING Never adjust the steering wheel AUDIO CONTROL when the vehicle is moving. Note: Make sure that you are sitting in the correct position.
Page 47
Steering wheel Seek Press a seek button to: • tune the radio to the next station up or down the frequency band • play the next or the previous CD track • fast forward or rewind the cassette tape. Press and hold a seek button to: •...
Wipers and washers WINDSCREEN WIPERS AUTOWIPERS CAUTIONS Do not switch autowipers on in dry weather conditions. The rain sensor is very sensitive and the wipers may operate if dirt, mist or flies hit the windscreen. Replace the wiper blades as soon as they begin to leave bands of water and smears.
Wipers and washers If you switch autowipers on, the wipers REAR WINDOW WIPER AND will not cycle until water is detected on WASHERS the windscreen. The rain sensor will then continuously measure the amount of Intermittent wipe water on the windscreen and adjust the speed of the wipers automatically.
Wipers and washers HEADLAMP WASHERS CAUTIONS You can use the service position in The headlamp washers will operate with winter to provide easier access to the windscreen washers when the the wiper blades for freeing them headlamps are on. from snow and ice. The windscreen wipers will return to their normal position Note: To stop the washer fluid reservoir as soon as you switch on the ignition so...
Page 51
Wipers and washers Lift the wiper arms. E72899 Install in the reverse order. Note: Make sure that the wiper blade locks into place. E93785 Rear window wiper blades E93786 E93783 Install in the reverse order. E93784...
Lighting One side LIGHTING CONTROL Lighting control positions E75505 Right-hand side Left-hand side E70718 Main and dipped beam Side and tail lamps Headlamps Parking lamps CAUTION Prolonged use of the parking lamps will discharge the battery. E70725 Switch off the ignition. Pull the lever fully towards the steering Both sides wheel to switch between main and...
Lighting Home safe lighting FRONT FOG LAMPS Switch the ignition off and pull the direction indicator lever towards the steering wheel to switch the headlamps on. You will hear a short tone. The headlamps will go off automatically after three minutes with any door open, or 30 seconds after the last door has been closed.
Page 55
Lighting Raised headlamp beams Lowered headlamp beams You can adjust the level of the headlamp beams according to the vehicle load. E70722 Recommended headlamp levelling switch positions Load Load in Switch posi- luggage Second row Third row tion Front seats compartment seats seats...
Lighting Vehicles with active suspension. HAZARD WARNING E71943 FLASHERS For item location: See Quick start (page Note: Depending on applicable laws and regulations in the country for which your vehicle was originally built, the hazard warning flashers may flash if you brake heavily.
Page 57
Lighting A message will appear in the information display if the system malfunctions. See Information messages (page 94). The headlamps will move to a fixed central or dipped position. Have the system checked as soon as possible. Cornering lamps E72898 Headlamp beam Cornering lamp beam The cornering lamps illuminate the inside...
Lighting If you set the switch to position B, the DIRECTION INDICATORS courtesy lamp will come on when you unlock or open a door or the luggage compartment lid. If you leave a door open with the ignition switch off, the courtesy lamp will go off automatically after some time to prevent the vehicle battery from discharging.
Lighting Vanity mirror lamps E72900 E72257 Note: When you remove the headlamp, make sure that the front screw remains in the headlamp moulding. If you switch off the ignition, the vanity mirror lamps will go off automatically after 2. Remove the screws. a short time to prevent the vehicle battery from discharging.
Lighting Note: When fitting the headlamp, make sure that you fully engage the headlamp in the lower fixing point. Note: When fitting the headlamp, make sure that the front screw is located in the headlamp moulding before you install it. Note: When fitting the headlamp, tighten the front screw first and then the rear screw.
Page 61
Lighting Headlamp main beam 1. Remove the headlamp. See Removing a headlamp (page 57). E72262 2. Disconnect the electrical connector. 3. Release the clip and remove the bulb. E72261 Side repeater 2. Disconnect the electrical connector. 3. Release the clip and remove the bulb. Headlamp dipped beam 1.
Page 62
Lighting E72291 2. Remove the bulb holder. E72265 3. Remove the bulb. 2. Remove the lamp. Approach lamp 3. Remove the bulb. Note: Position the mirror glass as far Front fog lamp and side lamp inwards as possible. (S-MAX) E72266 1.
Page 63
Lighting Front fog lamp and side lamp (Galaxy) E72268 2. Release the clip at the top edge of the lamp using a screwdriver. 3. Remove the lamp. E72267 1. Remove the screws. 2. Remove the lamp. 3. Disconnect the fog lamp electrical connector.
Page 64
Lighting 6. Remove the side lamp bulb. Rear lamp (S-MAX) Direction indicator and brake and tail lamp E74079 3. Remove the lamp. 4. Disconnect the electrical connector. E74078 1. Remove the trim panels. E74080 E72270 5. Remove the screw. 6. Remove the bulb holder. 2.
Page 65
6. Remove the bulb holder. 1. Remove the trim panel. 7. Gently press the bulb into the bulb holder, turn it anti-clockwise and remove it. Rear lamp (Galaxy) Direction indicator, brake lamp and tail lamp E74076 2. Remove the wing nuts.
Page 66
Lighting E72791 E72793 2. Remove the wing nuts. 5. Remove the screw. 6. Remove the bulb holder. 7. Gently press the bulb into the bulb holder, turn it anti-clockwise and remove it. Reversing lamp, fog lamp and tail lamp E72792 3.
Page 67
Lighting 8. Gently press the bulb into the bulb holder, turn it anti-clockwise and remove it. Central high mounted brake lamp (S-MAX) E72795 2. Remove the wing nuts. 3. Remove the lamp. 4. Disconnect the electrical connector. E75459 1. Remove the trim panel. E72797 5.
Page 68
Lighting Central high mounted brake Number plate lamp lamp (Galaxy) E72789 1. Carefully release the spring clip. E75457 2. Remove the lamp. 1. Remove the trim panel. 3. Turn the bulb anti-clockwise and remove it. Interior lamps Vehicles without interior sensors E75458 2.
Page 69
Lighting Vehicles with interior sensors Vehicles with interior sensors E72787 E72786 1. Carefully prise out the lens. 1. Carefully prise out the lamp. 2. Remove the lens. 2. Turn the bulb holder anti-clockwise and remove it. 3. Remove the bulb. Reading lamps Vehicles without interior sensors E73939...
Front direction indicator PY21W Headlamp main beam Headlamp dipped beam Cornering lamp Side repeater WY5W Approach lamp Front fog lamp (S-MAX) Front fog lamp (Galaxy) Side lamp Rear direction indicator PY21W Brake and tail lamp (S-MAX) P21/5W 21/5 Brake lamp (Galaxy) P21W...
Page 71
Lighting Lamp Specification Power (watt) Rear fog lamp P21W Reversing lamp P21W Central high mounted brake lamp W16W Number plate lamp Interior lamp Festoon Reading lamp BA 9s Vanity mirror lamp Luggage compartment lamp...
Windows and mirrors Driver’s door switches ELECTRIC WINDOWS WARNING Do not operate the electric windows unless they are free from obstruction. Note: If you operate the switches often during a short period of time, the system might become inoperable for a certain time to prevent damage due to overheating.
Page 73
Windows and mirrors 2. Close the window a third time to the resistance. The anti-trap function is disabled and you cannot close the window automatically. The window will override the resistance and you can close it fully. 3. If the window does not close after the third attempt, have it checked by a properly trained technician.
Windows and mirrors EXTERIOR MIRRORS ELECTRIC EXTERIOR MIRRORS Convex mirrors E71042 WARNING E70846 Do not overestimate the distance of the objects that you see in the Left-hand mirror convex mirror. Objects seen in convex mirrors will appear smaller and further away than they actually are. Right-hand mirror Folding mirrors Mirror tilting positions...
Windows and mirrors Electric folding mirrors The exterior mirror will return to the original position: The electric folding mirrors operate with • If the vehicle speed exceeds 10 km/h the ignition on. (6 mph). Note: You can operate the mirrors (mirror •...
Windows and mirrors AUTO-DIMMING MIRROR E71028 The auto-dimming mirror will adjust automatically when hit by glaring light from behind. It will not work when you have E95383 selected reverse gear. Closing REAR QUARTER WINDOWS Manual rear quarter windows Opening E95384 E72126...
Page 77
Windows and mirrors E95385 Note: Make sure that the lever is securely engaged in its catch. Electric rear quarter windows Switch on the ignition to operate the rear quarter windows. E72127...
Instruments GAUGES Type 1 and 2 E72984 Tachometer Engine coolant temperature gauge Fuel gauge Speedometer...
Page 79
Instruments Type 3 E87713 Tachometer Speedometer Engine coolant temperature gauge Fuel gauge Message centre. See Information displays (page 81). CAUTION Engine coolant temperature Do not restart the engine until the gauge cause of overheating has been Shows the temperature of the engine resolved.
Instruments Fuel gauge Airbag warning lamp The arrow adjacent to the fuel pump If it illuminates when driving, this symbol tells you on which side of your indicates a malfunction. Have vehicle the fuel filler cap is located. the system checked by a properly trained technician.
Page 81
Instruments Direction indicators Frost warning lamp Flashes during operation. A It will illuminate and glow amber sudden increase in the rate of when the outside air flashing warns of a failed temperature is between 4ºC indicator bulb. See Changing a bulb (39.2ºF) and 0ºC (32ºF).
Instruments Message indicator If you switch ESP off, the warning lamp will illuminate. The lamp will go out when It will illuminate when a new you switch the system back on or when message is stored in the you switch the ignition off. information display.
Information displays Press the up and down arrow buttons: GENERAL INFORMATION • to scroll through the trip computer WARNING displays • to scroll through and highlight the Do not operate the information options within a menu. display controls when the vehicle is moving.
Page 84
Information displays Function Type 1 Type 2 Type 3 Navigation control CD control CD changer control Radio control Phone control Auxiliary input control Press the up and down arrow buttons Type 1 on the steering wheel to scroll through the trip computer displays. See Trip computer (page 90).
Page 85
Information displays Type 2 Press the up and down arrow buttons on the steering wheel to scroll through the trip computer displays. See Trip computer (page 90). 09:00 Average Fuel 100km 123456 km 234.2 km E74426...
Page 86
Information displays Menu structure Reset Trip Trip Odo Avg. fuel Avg. speed Messages Information Tyre Press. Set Clock Clock 24 Hour Mode 12 Hour Mode Display Help Screen Configure Setup Radio Info Phone Info NAV info Always off On guidance Always on English Language...
Page 87
Information displays Low Fuel Chimes General info. General warn. Home light ACC warning FA warning Early Sensitivity Forw. Alert Normal Late Warn Audible Hill Launch Auto Manual Check Tyre Pressure Low load High load Full guard Alarm Reduced Ask on exit Time 1 Set Time Aux.
Page 88
Information displays Type 3 CD changer Radio Phone E88048 Trip computer Use the controls to scroll through the menu displays. Settings Device list The highlighted icon shows the current Auxiliary input menu in use. Navigation...
Page 89
Information displays Menu structure Navigation Home Destinations Destinat. mem. Destinations Destinat. A-Z Destinations Last destinat. Cancel guidan. Folder / Tracks Folder / Tracks CD changer CD 1 CD 2 Folder / Tracks CD 3 Folder / Tracks CD 4 Folder / Tracks CD 5 Folder / Tracks CD 6...
Page 90
Information displays Trip computer Distance to empty Average fuel Average speed Reset selected element Reset trip odometer Messages Information Settings Tyre Pressure Set Clock Clock 24-hour mode 12-hour mode Colour themes Display Setup Configure Help Screen NAV info Always off On guidance Always on Language...
Page 91
Information displays Low Fuel Chimes General info. General warn. Home light ACC warning FA warning Early Sensitivity Forw Alert Normal Late Warn Audible Hill Launch Auto Manual Check Tyre Pressure Low load High load Full guard Alarm Reduced Ask on exit Aux Heater E87756...
Information displays Set Time Time 1 Park heater Monday Tuesday Wednesday Thursday Friday Saturday Sunday Set Time Time 2 Monday Tuesday Wednesday Thursday Friday Saturday Sunday Once Active now Auxiliary input E88067 Average fuel consumption TRIP COMPUTER Indicates the average fuel consumption since the function was last reset.
Information displays Type 1 and 2 Note: The position of the trip computer display may vary depending on the information shown in the display. 10:20 Resetting the trip computer using the main menu To reset a particular display: 1. Press the right arrow button on the Average Fuel steering wheel to enter the main menu.
Information displays 3. Hold the OK button pressed. 2. Highlight Setup with the up and down arrow buttons and press the right arrow button. PERSONALISED SETTINGS 3. Highlight Display and press the right arrow button. The following information is displayed in the information display if you have 4.
Page 95
Information displays 5. Highlight Nav Info and press the right 4. Highlight Language and press the arrow button. right arrow button. 6. Highlight the desired setting and press 5. Highlight the desired setting and press the OK button to confirm the setting. the OK button to confirm the setting.
Information displays Message indicator 6. Press the left arrow button to return to exit the menu. Hold the left arrow The message indicator button pressed to return to the trip illuminates to supplement some computer display. messages. It will be red or amber depending on the severity of the Type 3 message and will remain on until the...
Page 97
Information displays 3. Highlight Information with the up 4. Highlight Messages and press the and down arrow buttons and press right arrow button. the right arrow button. 5. Use the up and down buttons to view the current messages. Active suspension Message Message Meaning...
Page 98
Information displays Climate control Message Message Meaning warning lamp Aux. Heater on amber The auxiliary heater is on. Cruise control / Adaptive cruise control (ACC) Message Message Meaning warning lamp Cruise control Cruise control is on. active Cruise control Cruise control is on standby. standby ACC unavailable Stability control (ESP) may be switched off.
Page 99
Information displays Message Message Meaning warning lamp Luggage comp. The luggage compartment is open. open Bonnet open The bonnet is open. Engine immobiliser Message Message Meaning warning lamp Immobiliser active amber The engine immobiliser is on. See Engine immobiliser (page 40). Hill launch assist (HLA) Message Message...
Page 100
Information displays Message Message Meaning warning lamp Rear fog light: Bulb One or both of the rear fog lamp bulbs have fault blown. Check the rear fog lamp bulbs. See Changing a bulb (page 58). Stop lamps: Bulb One or both of the brake lamp bulbs have blown. fault Check the brake lamp bulbs.
Page 101
Information displays Occupant protection Message Message Meaning warning lamp Crash mode Have the system checked as soon as possible. Electric parking brake (EPB) Message Message Meaning warning lamp Park brake The EPB has malfunctioned. Have this checked malfunction as soon as possible. Release park brake Release the EPB.
Page 102
Information displays Stability control (ESP) Message Message Meaning warning lamp ESP off Stability control is off. ESP malfunction Stability control has malfunctioned. Have this checked as soon as possible. Transmission Message Message Meaning warning lamp Transmission The transmission has malfunctioned. Have this malfunction checked as soon as possible.
Page 103
Information displays Message Message Meaning warning lamp Tyre monitor amber You have installed a temporary spare wheel. malfunction Install a correctly inflated full size wheel with a sensor as soon as possible. When a malfunction occurs, the system may not be able to detect or signal low tyre pressure.
Climate control Warming the interior PRINCIPLE OF OPERATION Direct the air towards your feet. In cold or Outside air humid weather conditions, direct some of the air towards the windscreen and the Keep the air intakes forward of the door windows. windscreen free from obstruction (snow, leaves etc.) to allow the climate control Cooling the interior...
Climate control Second row air vents Third row air vents E73132 MANUAL CLIMATE CONTROL Air distribution control E71379 E73131 Air flow through lower air vent Windscreen Air flow through upper air vent Footwell and windscreen Upper air vent Footwell Face level and footwell Use the upper air vents to defrost or demist the side windows.
Page 106
Climate control Ventilation You can set the air distribution control to any position between the symbols. Blower E71378 Set the air distribution control, blower and air vents to suit your requirements. Air conditioning E75470 Switching the air conditioning on and off Note: If you switch the blower off, the windscreen may mist up.
Page 107
Climate control Cooling the interior quickly When the temperature is above 4°C (39°F), the air conditioning will switch on automatically. Make sure that the blower is on. The indicator in the switch will illuminate during defrosting and demisting. If you move the air distribution control to a position other than A, the A/C will remain on.
Climate control AUTOMATIC CLIMATE CONTROL Dual-zone E80737 Triple-zone E70302...
Page 109
Climate control Your vehicle is fitted with either a You can set the temperature between dual-zone or triple-zone system. When 16ºC (61ºF) and 28ºC (82ºF) in steps of the system is in mono mode, all the 0.5ºC (1ºF). In position LO (below 16ºC temperature zones are linked to the [61ºF]) the system will switch to driver's zone.
Page 110
Climate control Blower When you select windscreen defrosting and demisting, A, B and C switch off High speed automatically and the air conditioning switches on. Outside air will flow into the vehicle. You cannot select recirculated air. Low speed The blower speed and the temperature control operate automatically and cannot be adjusted manually.
Page 111
Climate control Switching the automatic Rear air conditioning (triple- climate control on and off zone automatic climate control) Note: When switched off, the heating, Note: This is a cooling system only. You ventilation and air conditioning system for can use it to cool the rear. The system will both front and rear zones are switched not change the rear setting to a off and recirculated air is selected.
Climate control Rear temperature Switching the rear automatic climate control on and off Note: If you set different temperatures for the driver's side and rear, mono mode will be switched off. Note: When you press the MONO button, all three temperature zones will be adjusted to the temperature set for the driver's side.
Climate control Heated exterior mirrors Note: When the parking heater is activated, exhaust fumes may come from Electric exterior mirrors are fitted with a under the sides of the vehicle. This is heating element that will defrost or demist normal. the mirror glass.
Climate control 1. Press the right arrow button on the Programming the functions steering wheel to enter the main Program 1 and Program 2 menu. 2. Highlight Setup with the up and down arrow buttons and press the right Program 1 arrow button.
Page 115
Climate control Diesel auxiliary heater (depending on country) Parkheater Program 1 The diesel auxiliary heater (PTC electrical heater) aids in warming the engine and the vehicle interior on vehicles with a diesel engine. It is switched on or off automatically depending on the outside air temperature, the coolant temperature and the alternator load.
Page 116
Climate control 3. Highlight Aux. Heater and press the OK button to toggle the heater on and off. A cross appears in the box when the heater is activated. 4. Press the left arrow button to exit the menu. Hold the left arrow button pressed to return to the trip computer display.
Seats • hold the steering wheel with your arms SITTING IN THE CORRECT slightly bent. POSITION • bend your legs slightly so that you can press the pedals fully. • position the shoulder strap of the seat belt over the centre of your shoulder and position the lap strap tightly across your hips.
Seats Adjusting the lumbar support Adjusting the angle of the seatback E70729 E70731 Adjusting the height of the driver’s seat ELECTRIC SEATS 2-way electric seat E70730 E70733...
Seats HEAD RESTRAINTS REAR SEATS Adjusting the head restraint Second row seats Moving the seats backwards and WARNINGS forwards Raise the rear head restraint when the rear seat is occupied by a WARNING passenger. Rock the seat backwards and When using a forward facing child forwards after releasing the lever to restraint on a rear seat, always make sure that it is fully engaged in...
Page 121
Seats Adjusting the seatback E72704 E72645 1. To recline the seatback, pull the lever on the outboard seats or the strap on the centre seat and lean back against the seatback until it reaches the desired position. 2. To raise the seatback, pull the lever up and push the seat cushion forwards using your weight.
Page 122
Do not sit in a third row seat when the second row seat in front of it is folded flat. E72705 Moving the seats backwards and forwards (Galaxy) WARNING Rock the seat backwards and forwards after releasing the lever to make sure that it is fully engaged in its catch.
Page 123
When folding the seatbacks down, take care not to get your fingers caught between the seatback and seat frame. Note: On Galaxy, you can release the third row seat belts from the floor lugs. See Fastening the seat belts (page 27).
Page 124
Seats 1. Pull the loop at the rear of the seat cushion and fold the seat cushion forwards until it lies flat on the floor (1). 2. Grasp the grip (A) and pull the loop (B) at the base of the seatback upwards and rearwards (2).
Seats HEATED SEATS VENTILATED SEATS CAUTION CAUTION Operating this function with the Operating this function with the engine off will drain the battery. engine off will drain the battery. E70601 E70601 E71224 E70602 Note: The settings are stored when you Note: The settings are stored when the switch off the ignition.
Seats Note: The air in the vehicle interior is used to ventilate the seats. The cooling effect therefore depends on the temperature of the vehicle interior. Switch on the air conditioning if necessary and set the air distribution to footwell. See Climate control (page 102).
To release the blind, press the button. INSTRUMENT LIGHTING E74809 DIMMER Pull the blind up and attach it to the hooks (A). Roof (Galaxy) E70723 CLOCK E74808 Note: Some navigation systems will automatically set the date and time on the clock using GPS signals.
Note: You can use the socket to power 12 volt appliances that have a maximum current rating of 15 Amperes. Use only Ford accessory connectors or connectors specified for use with SAE standard sockets. E73705 To remove the ashtray, open it, press it down against the spring and remove it.
Note: You can use the socket to power 12 volt appliances that have a maximum WARNING current rating of 15 Amperes. Use only Ford accessory connectors or connectors Do not use the trays when the specified for use with SAE standard vehicle is moving. Make sure that sockets.
Convenience features STORAGECOMPARTMENTS WARNING Do not drive with any storage compartment lid open. Make sure that you secure the lid before setting off. CAUTION Do not keep heat-sensitive items and liquids in any storage compartment. Front storage compartments E73704 E72905 E72978 E72905 E72980...
Page 131
Convenience features Under seat storage compartment E73067 Rear storage compartment E72981 Overhead storage compartments WARNING Do not place heavy objects in the overhead storage compartments. CAUTION Do not exceed the maximum permissible loads of 1 kilogramme (2.2 pounds) for the smaller compartment and 2 kilogrammes (4.4 E72982 pounds) for the larger compartment.
Convenience features Under floor storage MAP POCKETS compartment WARNING When you are using a child restraint with a support leg on a second row seat, make sure that you locate the support leg securely on the under floor storage compartment lid. Make sure that you install the foam spacer correctly inside the storage compartment and that you position the lid correctly.
Convenience features GLASSES HOLDER E75193 E86768 MEMORY FUNCTION Seat adjustment controls See Electric seats (page 116). WARNINGS Memory pre-set buttons Before activating the seat memory, Up to four different driver's seat and make sure that the area immediately exterior mirror positions can be stored in surrounding the seat is clear of the memory.
Convenience features 3. Press and hold the desired pre-set CD CHANGER button B until a single chime sounds to confirm. This is located under the front passenger seat. Recalling a stored seat position Note: To stop seat movement during a AUXILIARY INPUT (AUX IN) recall, press any driver seat adjustment SOCKET...
Starting the engine Note: Do not leave the ignition key in this GENERAL INFORMATION position for too long to avoid discharging the battery. General points on starting II The ignition is switched on. All electrical If the battery has been disconnected the circuits are operational.
Starting the engine Cold or hot engine 2. Fully depress the accelerator pedal and hold it there. All vehicles 3. Start the engine. CAUTION Vehicles with automatic When the temperature is below transmission -20ºC (-4ºF), switch the ignition on 1. Select park or neutral. for at least one second before starting the engine.
Starting the engine Starting at low ambient If the battery has been disconnected or temperatures after the fuel type has been changed, the idle speed may be irregular. This will When the temperature is lower than -10°C improve after 10 to 30 seconds. (14°F) and the vehicle is filled with E85, an engine block heater should be used to STARTING A DIESEL ENGINE...
Starting the engine DIESEL PARTICULATE SWITCHING OFF THE FILTER (DPF) ENGINE Vehicles with a turbocharger The DPF forms part of the emissions reduction systems fitted to your vehicle. CAUTION It filters harmful diesel particulates (soot) from the exhaust gas. Do not switch the engine off when it is running at high speed.
Page 140
Starting the engine Connect the engine heater for 2 to 3 hours before starting the engine.
Fuel and refuelling SAFETY PRECAUTIONS CAUTIONS Do not use leaded petrol or petrol with additives containing other WARNINGS metallic compounds (e.g. Stop refuelling after the fuel nozzle manganese-based). They could damage stops the second time. Additional the emission system. fuel will fill the expansion space in the fuel tank which could lead to fuel Do not use methanol instead of bio overflowing.
Fuel and refuelling Parking WARNING Do not mix diesel with oil, petrol or WARNING other liquids. This could cause a Do not park your vehicle over dry chemical reaction. leaves or dry grass. The exhaust will continue to radiate a considerable CAUTION amount of heat after you have switched the engine off.
This could damage the the accessories fitted and towing etc. engine. Have the system checked by a Your Ford dealer can give you advice on properly trained technician immediately. improving your fuel consumption. TECHNICAL SPECIFICATIONS...
Transmission MANUAL TRANSMISSION AUTOMATICTRANSMISSION All vehicles Selector lever positions CAUTIONS Do not engage reverse gear when the vehicle is moving. This can cause damage to the transmission. Do not apply any undue lateral force to the gear lever when changing from 5th to 4th gear.
Page 147
Transmission Park Sport mode and manual shifting WARNINGS Select park only when your vehicle is stationary. Apply the parking brake and select park before leaving your vehicle. Make sure that the selector lever is latched in position. Note: An audible warning will sound if you open the driver's door and you have not selected park.
Page 148
Transmission 2. Release the brake pedal and press the accelerator pedal. Stopping 1. Release the accelerator pedal and press the brake pedal. 2. Apply the parking brake. Kickdown Press the accelerator pedal fully with the selector lever in the drive position to select the next lowest gear for optimum performance.
Brakes PRINCIPLE OF OPERATION PARKING BRAKE Disc brakes Applying the parking brake Wet brake discs result in reduced braking efficiency. Dab the brake pedal when driving from a car wash to remove the film of water. WARNING The ABS does not relieve you of your responsibility to drive with due care and attention.
Brakes Parking on a hill Parking on a hill If you have to park facing uphill, select first If you have to park facing uphill, select first gear and turn the front wheels away from gear and turn the front wheels away from the kerb.
Page 151
Brakes Preventing automatic Applying the EPB when the application of the EPB vehicle is moving WARNINGS WARNING Do not leave the vehicle if you have With the exception of emergency not applied the EPB. Remember conditions (for example, the brake that if you press down the switch pedal does not work or is blocked), while removing the key from the ignition...
Page 152
Brakes The brake system warning lamp will go Moving off with a trailer (vehicles off to confirm that the EPB has been with manual transmission) released. Depending on the gradient and the weight Note: On vehicles with manual of the trailer, the vehicle and trailer may transmission, if the gear lever is in neutral roll backwards slightly when you move off when you release the clutch pedal and...
Stability control Stability control (ESP) warning lamp PRINCIPLE OF OPERATION The ESP warning lamp will flash when the Electronic stability programme system is operating. See Warning (ESP) lamps and indicators (page 78). WARNING Emergency brake assist ESP does not relieve you of your WARNING responsibility to drive with due care and attention.
Hill launch assist (HLA) PRINCIPLE OF OPERATION The hill launch assist (HLA) system makes it easier to pull away when the vehicle is on a slope without the need to use the parking brake. When the HLA is active, the vehicle will remain stationary on the slope for two to three seconds after you release the brake pedal.
Page 155
Hill launch assist (HLA) Note: When HLA is in manual activation 1. Press the brake pedal to bring the mode, only use the HLA when pulling vehicle to a complete standstill. Keep away uphill on gradients greater than 3%. the brake pedal depressed. If the vehicle is on the flat or on a downhill 2.
Page 156
Hill launch assist (HLA) WARNING When HLA is active and the system detects a malfunction, the HLA is deactivated and the message Please use park brake! followed by Hill Launch A .not available is displayed in the information display. The vehicle is still safe to be driven and can be repaired during the next service.
Active suspension System malfunction PRINCIPLE OF OPERATION The active suspension system will switch The active suspension provides improved off automatically if it malfunctions. The handling, comfort and stability by suspension will be set to a fail-safe continuously adjusting the damper condition that will enable you to continue properties to the current road and driving driving but you will not be able to change...
Parking aid Switching the parking aid on PRINCIPLE OF OPERATION and off WARNING Note: The parking aid switches off automatically when you start the engine The parking aid does not relieve you or when you exceed 16 km/h (10 mph). of your responsibility to drive with due care and attention.
Page 159
Parking aid CAUTIONS The parking aid does not detect obstacles moving away from the vehicle. They will only be detected shortly after they start to move towards the vehicle again. Take particular care when reversing with a tow ball arm or rear fitted accessories e.g.
Cruise control Press the SET+ switch or the SET- PRINCIPLE OF OPERATION switch to store and maintain your current speed. The cruise control indicator Cruise control allows you to control your illuminates. speed using the switches on the steering wheel. You can use cruise control when Changing the set speed you exceed 30 km/h (20 mph).
Page 161
Cruise control Resuming the set speed E70616 Press the RES switch. The cruise control indicator illuminates and the system will attempt to resume the speed that you previously set. Switching cruise control off E70613 Press the OFF switch. The system will not retain the speed that you previously set.
The radar sensor is mounted behind the PRINCIPLE OF OPERATION front grille, immediately to the right of the Ford badge (when viewed from the front The adaptive cruise control system is of the vehicle). designed to help you maintain a gap from...
Adaptive cruise control (ACC) Detection beam issues WARNING In these cases ACC may brake late or unexpectedly. The driver should stay alert and intervene if necessary. Automatic braking with ACC Adaptive cruise control will automatically brake for you, if required to maintain the set gap between your vehicle and the one detected in front.
Page 164
Adaptive cruise control (ACC) Press the SET+ switch or the SET- switch to select your desired cruise speed. The speed is displayed in the information display and stored as the set speed. The ACC indicator illuminates. Note: Vehicle speed may be increased and decreased at intervals of 5 km/h or 5 mph.
Page 165
Adaptive cruise control (ACC) If no vehicle is detected in front, then only CAUTION your vehicle is displayed in the information Use the appropriate gap setting in display below the bars. The system will accordance with local traffic maintain the set speed when conditions regulations.
Adaptive cruise control (ACC) • vehicle speed falling below 30 km/h WARNINGS (20 mph) Never wait for a collision warning. • wheels lose traction When driving you are responsible for maintaining the correct distance • brake temperature is high, for and speed, even when the system is example when driving on mountainous used.
Page 167
Adaptive cruise control (ACC) CAUTION Warnings may be triggered late, be absent or triggered unnecessarily if the traffic situation means that the radar sensor cannot accurately detect a vehicle in front. The system uses the same radar sensors as adaptive cruise control (ACC) and therefore has the same limitations.
Load carrying GENERAL INFORMATION WARNINGS Use load securing straps to an approved standard, e.g. DIN. Make sure that you secure all loose items properly. Place luggage and other loads as low and as far forward as possible within the luggage or loadspace. Do not drive with the tailgate or rear door open.
Page 170
Load carrying S-MAX E75394 Vehicles without third row seats. Raise the carpet to gain access to the anchor points. Vehicles with third row seats...
Load carrying SLIDING LOADSPACE FLOOR WARNING Do not slide the loadspace floor rearwards when the vehicle is standing on an incline of 15 degrees or more and facing uphill. CAUTION The maximum permissible weight on the sliding loadspace floor is 200 kilogrammes (441 pounds).
Load carrying 3. Push the floor forwards until it engages at the front (2). 4. Release the support leg from the clip on the underside of the floor. 5. Insert the end into the square retainer in the left-hand rail (3). 6.
Load carrying S-MAX Vehicles without third row seats E75395 CARGO NETS Luggage retention net - type 1 E75891 WARNING When the retention net is installed, Behind the front seats do not sit in the seats behind it. Behind the second row seats CAUTION Keep a distance of at least one centimetre (½...
Page 174
Load carrying Installing the net E75892 E75893 Release button E75894...
Page 175
Load carrying Luggage retention net - type 2 1. Fold the seatbacks down. See Rear seats (page 118). CAUTIONS 2. If the retention net is folded, press the Do not exceed the maximum red release button C on the hinges of permissible retention net load of 1 the upper and lower bar 1 and unfold kilogram (2 pounds).
Load carrying LUGGAGE COVERS ROOF RACKS AND LOAD CARRIERS WARNING Roof rack Do not place objects on the luggage cover. WARNINGS If you use a roof rack, the fuel consumption of your vehicle will be higher and you may experience different driving characteristics.
Load carrying Installing the load retaining LOAD RETAINING FIXTURES fixtures Seatback E75002 WARNINGS E74997 Do not raise the seatback when a load retaining fixture is installed. Do not exceed the maximum permissible load of 60 kilogrammes (132 pounds) on two load retaining fixtures and 30 kilogrammes (66 pounds) on one.
Page 178
Load carrying Luggage compartment floor Sliding loadspace floor (vehicles with five seats) E75003 E74999...
Page 179
Load carrying Installing the luggage anchor points E75001 Installing the load bracket WARNINGS Install the load bracket with the longest section towards the rear of the vehicle. If you install it the wrong way round, it may not hold the box in place in the event of an accident.
Load carrying E76378 1. Turn the box over. 2. Position the load bracket. 3. Secure the load bracket with four screws. E76380 5. Position the load bracket onto the folded seatback so that the captured bolts go through the two holes in longest section of the bracket.
Page 181
Load carrying E75897 E75891 Behind the front seats Behind the second row seats Installing the dog guard E75896 E75892 Bar for installing the dog guard behind the front seats Bar for installing the dog guard behind the second row seats...
Page 182
Load carrying E75898 1. Fold the seatbacks down. See Rear seats (page 118). E75899 2. Attach the bar (C or D) to the luggage 1. Loosen the handwheel and remove it anchor points 1. See Luggage anchor points (page 167). Do not tighten the screws.
Towing TOWING A TRAILER DETACHABLE TOW BALL WARNINGS WARNINGS Do not exceed the maximum When not in use, always transport vehicle and trailer weight stated on the tow ball arm securely fastened the vehicle identification plate. See in the luggage compartment. Vehicle identification (page 236).
Page 184
Towing Unlocking the tow ball arm Inserting the tow ball arm mechanism E71329 1. Remove the protecting cap (1). Insert the key and turn it clockwise to unlock (2). 2. Hold the tow ball arm. Pull the handwheel out and turn it clockwise until it clicks (3).
Page 185
Towing Driving with a trailer Removing the tow ball arm E71331 WARNING If any of the below conditions cannot be met, do not use the tow bar and have it checked by a properly trained technician. Before starting your journey, make sure E71332 that the tow ball arm is properly locked.
Towing Driving without a trailer RETRACTABLE TOW BALL CAUTION Only move the tow ball arm with your hand. Never use your foot or auxiliary tools as damage to the mechanism may result. E94771 1. Remove the tow ball arm. 2. Insert the plug into its seat (1). WARNING Never unlock the tow ball arm with the trailer attached.
Page 187
Towing A 13-pin trailer socket B is provided underneath the rear bumper next to the tow ball arm C. E75175 E76040 Note: When not in use, insert the key into the storage position D to the right of the handwheel. Swivelling the tow ball in WARNINGS Keep your hands away from the...
Page 188
Towing 4. Manually turn the tow ball arm steadily from its midway position to the stop in the stowage position. The tow ball arm automatically locks in the end position. The locking process is clearly audible if the level of background noise is not too high.
Page 189
Towing 4. Manually turn the tow ball arm steadily CAUTIONS from its midway position to the stop When cleaning the vehicle with a in the operating position. The tow ball steam jet do not direct the high arm automatically locks in the end pressure jet directly onto the swivel position.
Driving hints RUNNING-IN Tyres WARNING New tyres need to be run-in for approximately 500 kilometres (300 miles). During this time, you may experience different driving characteristics. Brakes and clutch WARNING Avoid heavy use of the brakes and clutch if possible for the first 150 kilometres (100 miles) in town and for the first 1 500 kilometres (1 000 miles) on motorways.
Emergency equipment FIRST AID KIT E73238 Space is provided in the under floor storage compartment to store a first aid kit. See Storage compartments (page 128). WARNING TRIANGLE E73239 Space is provided in the under floor storage compartment to store a warning triangle.
Status after a collision INSPECTING SAFETY SYSTEM COMPONENTS Seat belts Belts subjected to strain, as a result of an accident, should be renewed and the anchorages checked by a properly trained technician.
Fuses FUSE BOX LOCATIONS Engine compartment fuse box E72590 2. Turn the knob through 90 degrees and release the fuse box from the retaining bracket. E72588 3. Lower the fuse box and pull it towards Central fuse box you. E72622 E72589 4.
Fuses Rear fuse box CHANGING A FUSE WARNINGS Do not modify the electrical system of your vehicle in any way. Have repairs to the electrical system and the replacement of relays and high current fuses carried out by a properly trained technician.
Page 196
Fuses Ampere Fuse Colour Circuits protected rating Engine cooling fan (2.3L Duratec-HE) clear Electric hydraulic power steering (EHPAS) clear (2.0L Duratorq-TDCi) blue Glow plugs blue Engine cooling fan HEGO sensor (engine management) Relay coils Powertrain control module Fuel injector (2.2L Duratec-HE and 2.3L Duratec-HE) Fuel injector, PTC heater (2.5L Duratec-ST) MAF control (engine management [diesel...
Page 197
Fuses Ampere Fuse Colour Circuits protected rating orange Starter relay clear Diesel auxiliary heater (PTC) blue Central fuse box supply A blue Central fuse box supply B blue Rear fuse box supply C blue Rear fuse box supply D – –...
Page 198
Fuses Ampere Fuse Colour Circuits protected rating blue Adaptive front lighting system (AFS) – – Not used yellow Instrument panel Engine control module, transmission control module, electric hydraulic power steering (EHPAS) (2.0L Duratorq-TDCi) Headlamp levelling, adaptive front lighting system (AFS) Electric hydraulic power steering module yellow (2.0L Duratorq-TDCi), vacuum pump (2.5L...
Page 199
Fuses Central fuse box E75527 Ampere Fuse Colour Circuits protected rating Rain sensor SRS (airbag) supply ABS, yaw rate sensor (ESP), electric parking brake (EPB) Electronic feed, accelerator pedal supply, brown electronic fuse Not used blue Audio system (including voice control)
Page 200
Fuses Ampere Fuse Colour Circuits protected rating brown Steering wheel module Instrument cluster blue Main beam Not used brown Reversing lamps – – Not used blue Front fog lamp blue Windscreen washers Adaptive cruise control (ACC) – – Not used Interior lamps Engine immobiliser blue...
Page 201
Fuses Rear fuse box E75526 Ampere Fuse Colour Circuits protected rating Door module (left-hand front) (window up/ clear down, central locking, electric folding mirror, heated mirror)
Page 202
Fuses Ampere Fuse Colour Circuits protected rating Door module (right-hand front) (window up/ clear down, central locking, electric folding mirror, heated mirror) Door module (left-hand rear) (window up/ clear down) Door module (right-hand rear) (window up/ clear down) Rear locking (without rear door modules) blue Auxiliary power socket Relay coils...
Page 203
Fuses Ampere Fuse Colour Circuits protected rating green Electric parking brake (EPB) green Electric parking brake (EPB) Rear air conditioning brown CD changer, rear seat entertainment system yellow Rear air conditioning blower Seat memory function module – – Not used –...
Vehicle recovery The screw-in towing eye is located in the TOWING POINTS underfloor storage compartment behind the front seats. See Rear under floor Front towing eye storage (page 170). The towing eye must always be carried in the vehicle. Insert your finger into the hole on the underside of the cover and prise off the cover.
Page 205
Vehicle recovery Vehicles with automatic transmission CAUTIONS Do not tow your vehicle faster than 50 km/h (30 mph) or further than 50 kilometres (30 miles). If a speed of 50 km/h (30 mph) and a distance of 50 kilometres (30 miles) is to be exceeded the drive wheels must be lifted clear of the ground.
Wheels and tyres (page 222). resale value. There is a large network of • Tyre condition. See Wheels and Ford Authorised Repairers that are there tyres (page 222). to help you with their professional servicing expertise. We believe that their...
Page 207
Maintenance E87785 Raise the bonnet slightly and move the E87786 catch towards the left-hand side of the Open the bonnet and support it with the vehicle. strut. Closing the bonnet WARNING Make sure that the bonnet is closed properly. Lower the bonnet and allow it to drop from under its own weight for the last 20 –...
Do not top up further than the MAX CAUTION mark. Do not use oil additives or other engine treatments. Under certain Top up with fluid that meets the Ford conditions, they could damage the specification. See Technical engine. specifications (page 215).
Maintenance Top up with fluid that meets the Ford CAUTIONS specification. See Technical Do not spill coolant on any part of the specifications (page 215). engine. Do not top up further than the MAX POWER STEERING FLUID mark. CHECK Top up with fluid that meets the Ford WARNING specification.
Vehicle fluids Item Recommended fluid Specification Ford or Motorcraft Formula E SAE 5W-30 Engine oil WSS-M2C913-B Engine Oil Ford or Motorcraft Power Power steering fluid WSS-M2C204-A2 Steering Fluid Motorcraft SuperPlus Anti- Coolant WSS-M97B44-D freeze Ford or Motorcraft Super Brake fluid...
Page 218
Maintenance Variant Item Capacity in litres (gallons) 2.0L Duratec-HE Engine cooling system 6.2 (1.4) 2.0L Duratec-HE Fuel tank 70 (15.4) Engine lubrication system - 2.3L Duratec-HE 4.3 (1.0) including the oil filter Engine lubrication system - 2.3L Duratec-HE 3.9 (0.9) excluding the oil filter 2.3L Duratec-HE Engine cooling system...
Page 219
Maintenance Variant Item Capacity in litres (gallons) 2.2L Duratorq-TDCi Fuel tank 70 (15.4)
Vehicle care Cleaning the chrome trim CLEANING THE EXTERIOR CAUTION WARNING Do not use abrasives or chemical If you use a car wash with a waxing solvents. Use soapy water. cycle, make sure that you remove the wax from the windscreen. Body paintwork preservation CAUTIONS CAUTIONS...
You should repair paintwork damage caused by stones from the road or minor scratches as soon as possible. A choice of products is available from your Ford Dealer. Read and follow the manufacturer’s instructions.
Vehicle battery To connect the booster cables BATTERY CARE The battery requires very little maintenance. The fluid level is checked regularly during the routine service inspections. USING BOOSTER CABLES CAUTIONS Connect batteries with only the same nominal voltage. Always use booster cables with insulated clamps and adequate size cable.
Vehicle battery 1. Position the vehicles so that they do not touch one another. 2. Switch off the engine and any electrical equipment. 3. Connect the positive (+) terminal of vehicle B with the positive (+) terminal of vehicle A (cable C). 4.
Wheels and tyres GENERAL INFORMATION CAUTION Use only the specified jacking points. CAUTIONS If you use other positions, you may Use only approved wheel and tyre damage the body, steering, sizes. Using other sizes could suspension, engine, braking system or damage the vehicle and will make the fuel lines.
Page 225
Wheels and tyres WARNINGS Make sure that the vehicle is on firm, level ground with the wheels pointing straight ahead. Switch off the ignition and apply the parking brake. If your vehicle has a manual transmission, select first or reverse gear.
Page 226
Wheels and tyres Note: You can use wheel nuts designed for use with alloy wheels with steel wheels. Note: Make sure the wheel and hub contact surfaces are free from foreign matter. Note: Make sure that the cones on the wheel nuts are against the wheel.
Wheels and tyres General information WARNINGS Depending on the type and extent of tyre damage, some tyres can only be partially sealed or not sealed at all. Loss of tyre pressure can affect vehicle handling, leading to loss of vehicle control.
Page 228
Wheels and tyres Using the tyre repair kit Inflating the tyre WARNINGS WARNINGS Compressed air can act as an Check the sidewall of the tyre prior explosive or propellant. to inflation. If there are any cracks, bumps or similar damage, do not Never leave the tyre repair kit attempt to inflate the tyre.
Page 229
Wheels and tyres E94973 Protective cap Pressure relief valve Hose Orange cap...
Page 230
Wheels and tyres Bottle holder Pressure gauge Power plug with cable Compressor switch Label Bottle lid Sealant bottle Inflate the tyre for no longer than 1. Open the lid of the tyre repair kit. seven minutes to an inflation 2. Peel off the label I showing the pressure of minimum 1.8 bar (26 psi) maximum permissible speed of and a maximum of 3.5 bar (51 psi).
Page 231
Wheels and tyres 8. Drive to the nearest tyre specialist to WARNING get the damaged tyre replaced. If you experience heavy vibrations, Before the tyre is removed from the unsteady steering behaviour or rim, inform your tyre dealer that the noises while driving, reduce your tyre contains sealant.
Wheels and tyres When a standard tyre experiences a RUN FLAT TYRES drastic loss of inflation pressure, the rim of the wheel brings the full weight of the Principle of operation vehicle to bear on the collapsed sidewalls. Standard tyre You can barely manoeuvre the vehicle and the tyre is destroyed.
Wheels and tyres Examine the tyres regularly for cuts, WARNINGS foreign objects and uneven wear of the Do not fit a mixture of run flat and tread. Uneven wear could mean that the standard tyres. In isolated cases, a wheel alignment is outside specification. standard tyre can be temporarily mounted on a vehicle otherwise equipped Check the tyre pressures (including the...
Wheels and tyres Checking the tyre pressures TYRE PRESSURE MONITORING SYSTEM Note: If the tyre pressures are greater than or equal to 3.3 bar (48 lbf/in²), you will see the + symbol below the pressure WARNINGS value. The system only measures The system does not relieve you of pressure up to 3.3 bar (48 lbf/in²).
Wheels and tyres 3. Highlight Tyre Pressures with the 4. Highlight the desired setting and press up and down buttons and press the the OK button to confirm the setting. right arrow button. 5. Press the left arrow button to exit the menu.
Page 236
Wheels and tyres Normal load Full load Front Rear Front Rear Variant Tyre size (lbf/in²) (lbf/in²) (lbf/in²) (lbf/in²) All except 2.0L Duratec-HE and 2.3L 235/45 R 18 2.4 (35) 2.2 (32) 2.6 (38) 3.1 (45) Duratec-HE Continuous speed in excess of 160 km/h (100 mph) Tyre pressures Normal load Full load...
Page 237
Wheels and tyres Normal load Full load Front Rear Front Rear Variant Tyre size (lbf/in²) (lbf/in²) (lbf/in²) (lbf/in²) 2.2L Duratorq-TDCi 225/50 R 17 2.5 (36) 2.3 (33) 2.6 (38) 3.1 (45) 2.2L Duratorq-TDCi 235/45 R 18 2.5 (36) 2.3 (33) 2.6 (38) 3.1 (45)
Vehicle identification VEHICLE IDENTIFICATION VEHICLE IDENTIFICATION PLATE NUMBER (VIN) E85610 E87496 Vehicle identification number The vehicle identification number is stamped into the floor panel on the Gross vehicle weight right-hand side, beside the front seat. It is Gross train weight also shown on the left-hand side of the instrument panel.
Page 241
Technical specifications Item Dimension description Dimension in mm (inches) Maximum length 4 820 (189.8) Overall width including exterior mirrors 2 154 (84.8) 1 691 - 1 764 Overall height at EC kerb weight without roof bars (66.6 - 69.4) Overall height at EC kerb weight including roof bars 1 770 - 1 807 (69.7 - 71.1) Wheelbase 2 850 (112.2)
Page 242
Technical specifications Towing equipment dimensions S-MAX E75182 Item Dimension description Dimension in mm (inches) Bumper – end of tow ball 102 (4.02) Attachment point – centre of tow ball 16 (0.63) Wheel centre – centre of tow ball 1 079 (42.48) Centre of tow ball –...
Page 243
Dimension in mm (inches) Centre of tow ball – centre 2. attachment point 424 (16.69) Centre of tow ball – centre 3. attachment point 636 (25.04) Galaxy E75181 Item Dimension description Dimension in mm (inches) Bumper – end of tow ball 101 (3.98)
Page 244
Technical specifications Item Dimension description Dimension in mm (inches) Centre of tow ball – side member 438 (17.24) Inner side of side member 876 (34.49) Centre of tow ball – centre 1. attachment point 412 (16.22) Centre of tow ball – centre 2. attachment point 473 (18.62) Centre of tow ball –...
Note: Certain phones require a special Office file to be installed to enable full phonebook access via Bluetooth. E87993 This is referred to as a SIS file and will be available to download via the Ford website www.ford- E87994 mobile-connectivity.com.
Bluetooth phone. described in the requirements for a 3. Search for audio device. Bluetooth connection. 4. Select Ford Audio. Phones stored in the system are 5. Enter the code number shown on the accessible by using the phone list on the vehicle display using the phone audio unit.
Telephone Making a call TELEPHONE CONTROLS Dialling a number using voice Remote control control Voice and mode button Phone numbers can be dialled using voice control. See Telephone commands (page 261). Dialling a number using the address book You can access your phone address book via Bluetooth.
Page 248
Telephone Dialling a number using the Redialling a number - Sony radio telephone keypad 1. Press the PHONE or the call accept If you have an audio unit with a telephone button. keypad (buttons 0-9, * and #): 2. Press the seek button until the desired list is displayed.
Page 249
Telephone Accepting a second incoming call Using the audio unit menu Second incoming calls can be accepted Note: After bonding a phone to the by pressing either the call accept button, system, this becomes the active phone. the PHONE button, or the MODE button 1.
Telephone 3. Scroll through the different phones by Rejecting an incoming call using the seek buttons and display the Incoming calls can be rejected by phone to be debonded. pressing either the call reject button, the 4. Press the OK button to be debond. CD or AM/FM buttons on the unit, or by using the REJECT option in the menu.
Page 251
Telephone CD navigation units Press the microphone mute button. Press the button once again to turn this function off. Changing the active phone Note: Phones must be bonded to the system before they can be made active. Note: After bonding a phone to the system, this becomes the active phone.
Voice control System response PRINCIPLE OF OPERATION As you work through a voice session the CAUTION system will prompt you with a beep tone each time the system is ready to proceed. Using the system with the engine off will drain the battery. Do not try to give any commands until the beep tone has been heard.
Voice control Name tag • phone: "MOBILE NAME", "DIAL NUMBER", "DIAL NAME", and The name tag functionality can support "REDIAL" the phone, audio and navigation features • CD player/CD changer: "DISC" and by using the "STORE NAME" function. You "TRACK" can assign name tags to items such as •...
Page 254
Voice control "CD PLAYER" "REPEAT TRACK" "REPEAT OFF" * Can be used as a shortcut. ** Only available if the CD contains audio data files like MP3 or WMA. Track You can choose a track on your CD directly. Steps User says System answer "CD PLAYER"...
Page 255
Voice control "CD CHANGER" "HELP" "PLAY" "DISC" "TRACK" "SHUFFLE ALL" "SHUFFLE CD" "SHUFFLE FOLDER" "SHUFFLE OFF" "REPEAT CD" "REPEAT FOLDER" "REPEAT TRACK" "REPEAT OFF" * Can be used as a shortcut. ** Only available if the CD contains audio data files like MP3 or WMA. Disc If you have a CD changer you can choose the disc number.
Page 256
Voice control Steps User says System answer "CD CHANGER" "CD CHANGER" "TRACK NUMBER PLEASE" "TRACK" "TRACK <number>" "<a number between 1 and 99>" * Can be used as a shortcut. ** Additionally, numbers can be spoken as up to four single digits (for example "2", "4", "5"...
Page 257
Voice control "RADIO" "PLAY" * Can be used as a shortcut. Tune frequency This function allows you to tune your radio by voice commands. Steps User says System answer "RADIO" "RADIO" "AM" "AM FREQUENCY PLEASE" "FM" "FM FREQUENCY PLEASE" "TUNE <frequency>" "<frequency>"...
Page 258
Voice control Tune name This function allows you to call up a stored radio station. Steps User says System answer "RADIO" "RADIO" "NAME PLEASE" "TUNE NAME" "<name>" "TUNE <name>" * Can be used as a shortcut. Delete name This function allows you to delete a stored radio station.
Page 259
Voice control Steps User says System answer "RADIO" "RADIO" "DELETE DIRECTORY" "DELETE DIRECTORY" "CONFIRM YES OR NO" "YES" "RADIO DIRECTORY DELETED" "NO" "COMMAND CANCELLED" Play This function switches the audio source to the radio mode. Steps User says System answer "RADIO"...
Page 260
Voice control "EXTERNAL DEVICE", "USB" "SHUFFLE OFF" "REPEAT TRACK" "REPEAT FOLDER" "REPEAT OFF" * Can be used as a shortcut. ** Playlists and folders activated by voice control must be assigned special filenames. See General information (page 269). USB play This function allows you to switch the audio source to the attached USB device.
Page 261
Voice control External devices - iPod Overview The overview below shows the available These voice commands support the voice commands. The following lists will functionality of an iPod which may be give further information about the connected to the audio unit. complete command menu in selected examples.
Page 262
Voice control ** Additionally, numbers can be spoken as up to five single digits (for example "5", "2", "4", "5", "3" for track 52453), to a limit of 65535. iPod playlist You can choose a playlist from your iPod directly. Steps User says System answer...
Voice control SD card play This function allows you to switch the audio source to the SD card audio files. Steps User says System answer "SD CARD" "SD CARD" "PLAY" SD card track You can choose a track on your SD card directly.
Page 264
Voice control "PHONE" "DIAL NUMBER" "DIAL NAME" "DELETE NAME" "DELETE DIRECTORY" "PLAY DIRECTORY" "STORE NAME" "REDIAL" "ACCEPT CALLS" "REJECT CALLS" * Can be used as a shortcut. Create a phonebook Store name New entries can be stored with the "STORE NAME" command. This feature can be used to dial a number by calling up the name instead of the full phone number.
Page 265
Voice control Delete name Stored names can also be deleted from the directory. Steps User says System answer "PHONE" "PHONE" "DELETE NAME" "NAME PLEASE" "<name>" "DELETE <name>" "CONFIRM YES OR NO" "YES" "<name> DELETED" "NO" "COMMAND CANCELLED" Play directory Use this function to let the system tell you all stored entries.
Page 266
Voice control Phone functions This function allows you to access phone numbers stored with a name tag in your Mobile name mobile phone. Steps User says System answer "PHONE" "PHONE" "MOBILE NAME" "<phone "MOBILE NAME" dependent dialogue>" * Can be used as a shortcut. Dial number Phone numbers can be dialled after giving the name tag voice command.
Page 267
Voice control Steps User says System answer "YES" "DIALLING" "NO" "COMMAND CANCELLED" * Can be used as a shortcut. Redial This function allows you to redial the last dialled phone number. Steps User says System answer "PHONE" "PHONE" "REDIAL" "REDIAL" "CONFIRM YES OR NO"...
Voice control Steps User says System answer "PHONE" "PHONE" "REJECT CALLS" "REJECT CALLS" "ACCEPT CALLS" "ACCEPT CALLS" * use this command to turn the reject mode off CLIMATE CONTROL NAVIGATION SYSTEM COMMANDS COMMANDS Climate Please refer to your separate Navigation handbook for details of the command The climate voice commands supports menus.
Page 269
Voice control This function allows you to adjust the fan speed. Steps User says System answer "CLIMATE" "CLIMATE" "FAN SPEED PLEASE" "‘FAN" "MINIMUM" "FAN MINIMUM" "<a number between 0 and 7>" "FAN <number>" "MAXIMUM" "FAN MAXIMUM" * Can be used as a shortcut. On vehicles fitted with an English language module the "FAN"...
Page 270
Voice control Steps User says System answer "<a number between 15 and 29 °C with 0.5 increments>" or "<a "TEMPERATURE <number>" number between 59 and 84 °F>" "MAXIMUM" "TEMPERATURE MAXIMUM" * Can be used as a shortcut. Auto mode Steps User says System answer "CLIMATE"...
MP3 players with USB connection socket in the vehicle. Cover the • iPod media players (refer to socket when not in use. www.ford-mobile Only use USB Mass-Storage device -connectivity.com for latest compliant devices. compatibility list). Always switch your audio unit to a The system is USB 2.0 full speed...
Plug in the device, and if necessary below: secure it to prevent movement within the • Create folders named with the vehicle. structure "Ford<*>" where <*> is a number 1-10. For example "Ford3" Connecting an iPod without an extension. For optimum convenience and audio •...
Page 273
Connectivity Track title To navigate the USB device contents, use the up/down arrow keys to scroll through E100027 lists, and the left/right keys to move up or down within the folder hierarchy. Once Information not available your desired track, playlist or folder is highlighted, press the OK button to select E100028 playback.
Page 274
Connectivity CD Navigation units Audio control Press the SEEK up and down keys to Operation skip backwards and forwards through Select the USB device as the audio tracks. source by pressing the CD/AUX button Press and hold the SEEK keys to enable until DEVICES appears in the display.
Connectivity To browse the device contents, press the Press the INFO button to display the scroll up or down arrow button. following: • filename The display will show the track information, together with other important • title information described below: •...
Page 276
Connectivity The iPod menu list for browsing contents Press the MENU key to enter the iPod will be available through the radio display. menu. It is possible to enable shuffle and Navigation of the contents follows the repeat functions here. It is also possible same principles as for iPod standalone to enable the iPod "Shuffle songs"...
Page 277
Connectivity DVD Navigation units • "<" before the list indicates that a further level up is readable. Operation • An icon on the left side indicates the type of the currently displayed list (for Select the iPod as the audio source by example list of albums).
Page 278
Connectivity Audio control Press the SEEK up and down keys to skip backwards and forwards through tracks. Press and hold the SEEK keys to enable fast rewind/fast forward through track content. Press the scroll bar arrow keys to browse the iPod contents. Press the MENU key to enter the iPod menu.
Appendices Note: We recommend that you use the TYPE APPROVALS remote control only in the countries listed. Remote control If the type approval of your remote control is inspected, refer to the following table. Remote control with flip key E76938...
Page 280
Appendices Remote control without flip key E76939...
Page 281
Appendices Engine immobiliser If the type approval of your engine immobiliser is inspected, refer to the following table. E76940...
Appendices E76974 The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any TYPE APPROVALS use of such marks by Ford Motor Company is under license. Other FCC/INDUSTRY CANADA trademarks and trade names are those NOTICE of their respective owners.
Page 285
Appendices WARNINGS WARNINGS Do not fasten antenna cables to Keep antenna and power cables at original vehicle wiring, fuel pipes and least 100mm from any electronic brake pipes. modules and airbags. E85998 Frequency Maximum output power Watt Antenna Positions Band MHz (Peak RMS) 1 –...
Page 286
Appendices Frequency Maximum output power Watt Antenna Positions Band MHz (Peak RMS) 2400 – 2500 0.1 W All positions Only for GSM/3G cellular phones, with a patch antenna installed inside of the front windscreen. Note: After the installation of RF transmitters, check for disturbances from and to all electrical equipment in the vehicle, both in the standby and transmit...
Page 287
Appendices..........277 country).............113 Arming the alarm........43 Parking heater..........111 All vehicles.............43 Auxiliary input (AUX IN) socket....132 Arming the engine immobiliser.....40 Auxiliary power sockets.......126 Ashtray............126 Galaxy............127 Front ashtray..........126 S-Max............127 Rear ashtray..........126 Audible warnings and indicators..80 Switching the chimes on and off....80 Battery care...........220...
Page 288
Topping up...........214 Luggage compartment lamp.....68 Brakes.............147 Number plate lamp........66 Principle of operation.........147 Reading lamps..........67 Bulb changing Rear lamp (Galaxy)........63 See: Changing a bulb........58 Rear lamp (S-MAX)........62 Bulb specification chart......68 Side repeater..........59 Vanity mirror lamp........68 Changing a fuse........192 Changing a road wheel.......222 Cargo nets..........171...
Page 289
Index Cleaning the exterior......218 Disarming the alarm........43 Body paintwork preservation....218 Category one alarm........43 Cleaning the chrome trim......218 Perimeter alarm..........43 Disarming the engine immobiliser..40 Cleaning the headlamps......218 Dog guard..........178 Cleaning the rear window......218 Cleaning the interior......218 Installing the dog guard......179 Instrument cluster screens, LCD screens, radio screens..........219 See: Diesel particulate filter (DPF)....137 Driving hints..........188...
Page 290
Index Engine immobiliser........40 General information on radio frequencies..........31 Principle of operation........40 Engine oil check........213 Glasses holder........131 Global opening and closing....37 Checking the oil level.........213 Topping up...........213 Global closing..........38 Engine oil dipstick........Global opening..........38 Glove box..........127 See: Electric parking brake (EPB)....148 Cooled glove box........127 Exterior mirrors........72 Convex mirrors..........72...
Page 291
Reprogramming the unlocking ISOFIX anchor points......23 function............37 Attaching a child seat with top Locks............35 tethers............23 Luggage anchor points......167 Top tether anchor points......23 Galaxy............167 S-MAX............168 Luggage covers........174 Jump starting See: Using booster cables.......220 Maintenance.........204 General information........204 Technical specifications......215 Keys and remote controls......31 Keys See: Using the key........31...
Page 292
Recirculated air...........104 Look for the Ford logo on the following Ventilation.............104 parts .............6 Manual seats...........115 Now you can be sure that your Ford parts Adjusting the angle of the seatback..116 are Ford parts..........6 Personalised settings......92 Adjusting the height of the driver’s seat............116...
Page 293
Under floor storage compartment..130 Principle of operation........230 Under seat storage compartment..129 Sun blinds..........125 Replacing run flat tyres......230 What to do if a run flat tyre has a Roof (Galaxy)..........125 puncture..........230 Roof (S-Max)..........125 Running-in..........188 Side windows..........125 Switching off the engine.......137 Brakes and clutch........188 Engine............188...
Page 294
Index Towing the vehicle on four Using an iPod.........273 wheels..........202 CD Navigation units........274 All vehicles...........202 DVD Navigation units.........275 Vehicles with automatic transmission..203 Sony radio...........273 Towing............181 Using a USB device......270 Transmission..........144 CD Navigation units........272 Trip computer..........90 DVD Navigation units.........272 Average fuel consumption......90 Sony radio............271 Using booster cables......220 Average speed..........90...
Page 295
Index Vehicle identification......236 Windscreen washers......47 Vehicle recovery........202 Windscreen wipers.........46 Ventilated seats........123 Intermittent wipe..........46 Ventilation Winter tyres See: Climate control........102 See: Using winter tyres......231 Vents Wipers and washers.......46 See: Air vents..........102 Technical specifications......50 See: Vehicle identification number (VIN)............236 Voice control.........250 Principle of operation........250 Warning lamps and indicators....78 ABS warning lamp........78 Airbag warning lamp........78...
Need help?
Do you have a question about the Galaxy and is the answer not in the manual?
Questions and answers
second hand owners manual for ml57ffk