Sharp PN-ZT10E Operation Manual page 14

Preparation
Tips
• You can confi rm proper installation of the TouchPanel driver.
1. Click the "start" button and select "Control Panel".
2. Click "Performance and Maintenance", "System".
When you use the Classic View, double-click "System".
3. Click "Hardware", "Device Manager".
4. Double-click "Ports (COM & LPT)".
When "TouchPanel USB-Serial-V2 Port (COMx)" is displayed, the driver has been installed properly.
"COMx" indicates the COM port No. used for the touch panel. The number varies depending on the PC.
Caution
• After the driver is installed, do not change the USB terminal of your PC that is used for the touch panel.
Installing the TouchPanel Setting Program
• The TouchPanel Setting Program is a programme enabling you to use the touch panel to perform
mouse operation of the existing application programmes. You can also confi gure the settings of the
touch panel operation.
• Before installing the TouchPanel Setting Program, ensure that the TouchPanel driver has been installed
properly (See above).
Caution
• This procedure requires administrator privilege.
• If a former version of the TouchPanel Setting Program has been installed in the PC, delete it (uninstall it) before
installing the new programme.
1. Insert the supplied Utility Disk into the CD-ROM drive of the PC.
2. In "My Computer", open the CD-ROM icon.
3. Double-click "tpdrv", "setup.exe".
The installer starts.
4. Click "OK".
5. Click the button.
To change the installation directory, click "Change Directory" and select the desired directory.
6. Click "Continue".
7. Click "OK".
This fi nishes installation of the TouchPanel Setting Program.
Restart the PC.
From the next time you start the PC, the TouchPanel Setting Program is activated automatically to
enable touch panel operation.
When the TouchPanel Setting Program is activated for the fi rst time, a calibration screen is displayed
automatically. Follow the instructions on the screen to perform calibration (position adjustment). (See
page 13.)
Tips
• The touch panel is disabled when the TouchPanel Setting Program is not active, including the following occasions:
- When the Windows login screen is displayed.
- When the screen shows a screensaver for which "On resume, password protect" has been set.
- After the "Turn Off Computer" option of Windows is selected.
12
E
(Continued)