Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.
Page 3
Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we’ll introduce our model description. ■ SCV-3082 SERIES • NTSC MODEL • PAL MODEL SCV-3082P SCV-3082N ■ MODEL DESCRIPTION • SCV-3082X...
safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
Page 5
If this product fails to operate normally, contact the nearest service center. never disassemble or modify this product in any way. (samsung is not liable for problems caused by unauthorized modifications or attempted repair.) When cleaning, do not spray water directly onto parts of the product.
safety information fCC sTATemeNT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents...
contents INTRODUCTION Features What’s included Component names and Functions INsTAllATION Installation Adjust the panning and tilting while watching the monitor CONNeCTION Connecting to Monitor Connecting to Power Using Coaxial Communications seTUp Menu Configration Menu Setup TROUblesHOOTING Troubleshooting speCIfICATIONs Specifications Dimension _ contents...
Vps(Virtual progressive scan) Adopting Samsung's unique development, the VPS(Virtual Progressive Scan) enhances the sharpness of moving subject's outline. The VPS enables elective output in progressive mode using the existing interlaced input and effectively enhances the sharpness of captured pictures from video and still images.
Page 10
introduction DIs (Digital Image stabilizer) The DIS function compensates for any camera movement, to produce more stable pictures. IP66 Approved/Dust and Rain Resistant With dust and rain resistant design, the camera can be installed outside under building eaves or places that are exposed to the dust and rain. miscellaneous functions ...
5.SSNR3 5.SSNR3 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. EIN / AUS 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business 6.TAG/NACHT AUTO 6.DIA/NOCHE AUTO Toll Free : +1-877-213-1222 Direct : +1-201-325-6920...
introduction COmpONeNT NAmes AND fUNCTIONs OVeRVIeW ➌ ❶ ➏ ➐ ⓬ ⓫ ❿ ➒ ➑ Dome Cover ❶ shield Case ❷ Pan Base : control panning angle of camera ❸ 3.9 Vari-focal Lens Module 2.8 ~ 11.0mm (F1.2) ❹ Function Setup Switch : Display the OSD menu and move the cursor up, down, ❺...
installation DIsAssemblING Using the L-wrench provided, loosen 3 screws by turning them counterclockwise and separate the dome cover. Dome Cover INsTAllING THe CAmeRA ON A CeIlING OR WAll Drill holes on the ceiling by matching to the holes on the case bed, and insert plastic anchors (HUD 5) (not included) fully into the holes.
Page 14
installation Connect Power and video cables and arrange them through the hole you want to pass when mounting the main body on the mounting bracket, note that not to damage or squeeze the cables. Video output jack Power input terminal Adjust the lens in a desired direction.
ADJUsT THe pANNING, TIlTING & ROTATION WHIle WATCHING THe mONITOR 73˚ 174˚ 174˚ 176˚ Rotate Base Tilt Base Pan Base 176˚ You can adjust camera to any direction by using Pan, Tilt, Rotate mechanism. Pan Base moves by 176˚ to each side direction and 352˚ on the whole. ...
connection CONNeCTING TO mONITOR Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor. CCTV Camera Monitor As the connecting method varies with the instruments, refer to the manual supplied with the instrument. Only connect the cable when the power is turned off. ...
* Standard voltage for camera operation : DC 12V ±10%, AC 24V ± 10% * There may be some deviation in voltage drop depending on the type of wire and the manufacturer. Be sure to connect power only after all the installation is complete. Note that AC/DC adaptor is not supplied with camera.
setup meNU CONfIGRATION setup menu leNs ● BRIGHTNESS SHUTTER ● ● ● eXpOsURe SENS-UP RETURN ● ● ssDR ● ● ● ATW ● OUTDOOR ● INDOOR WHITe bAl ● AWC → SET ● MANUAL USER BLC ● ● ● bACKlIGHT ●...
Page 19
Press the Function Setup switch. Main setup menu is displayed on the monitor screen. MAIN SETUP ▶ 1.LENS Select the function Change the status by moving up or by moving the 2.EXPOSURE down direction of setup switch left or SSDR function setup switch.
Page 20
setup eXpOsURe When the SETUP menu screen is displayed, MAIN SETUP select EXPOSURE by using the Function 1.LENS Setup switch so that the arrow indicates ▶ 2.EXPOSURE 'EXPOSURE'. 3.SSDR Select a desired mode using the Function Setup switch. bRIGHTNess : Adjusts the video brightness. ...
Page 21
Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation when the sens-up level is increased, this is normal. ssDR (samsung super Dynamic Range) image SSDR illuminates darker areas of an SSDR SETUP while retaining the same light level for brighter areas to even out the overall brightness of ▶...
Page 22
setup ATW : Select this when the color temperature is between 1,700°K and 11,000°K. OUTDOOR : Select this when the color temperature is between 1,700°K and 11,000°K.(sodium light inclusion) Select this When the color temperature of environment surrounding the subject is out of the control range (e.g.
Page 23
Off : Not being used UseR blC : Enables a user to directly BLC SETUP select a desired area from a ▶ 1.LEVEL MIDDLE picture, and to view the area 2.TOP IIIII IIIIIIIIIIIIIIII more clearly. 3.BOTTOM IIIIIIIIIIIIIIIIII III 4.LEFT IIIIII ...
Page 24
setup < WDR ON > < WDR OFF > Because there can be a difference in the effectiveness of HLC according to the amount of light area in the screen, optimize the installation angle for the best HLC performance. In a dark environment, the HLC is only activated when a high light that is larger than a certain area is present.
Page 25
SSNR3 This function reduces the background noise in a low luminance environments. When the SETUP menu screen is displayed, MAIN SETUP select 'SSNR3' by using the Function Setup 1.LENS switch so that the arrow indicates 'SSNR3' . 2.EXPOSURE Select a desired mode using the Function 3.SSDR 4.WHITE BAL Setup switch.
Page 26
setup AUTO SETUP ▶1.BURST MODE 2.COLORB/W DURATION FAST DWELL TIME 5 SEC 3.B/WCOLOR DURATION FAST DWELL TIME 10 SEC 4.RETURN BURST MODE : You can turn on or off the burst signal on B/W mode. DWELL TIME : You can select the duration time about changing the day/night mode.
Page 27
SPECIAL When the SETUP menu screen is displayed, MAIN SETUP select ‘SPECIAL’ by using the Function Setup 1.LENS switch so that the arrow indicates ‘SPECIAL’. 2.EXPOSURE Select a desired mode using the Function 3.SSDR Setup switch. 4.WHITE BAL 5.BACKLIGHT ImAGe ADJ : ...
Page 28
setup ReVeRse : You can reverse the picture. OFF : You don’t reverse the picture. H-REV : You can flip the picture horizontally on the screen. V-REV : You can flip the picture vertically on the screen. H V-REV : You can flip the picture horizontally and vertically on the screen. pIp(picture in picture) : Displays a full- ...
Page 29
CAm TITle : If you enter a title, the title will appear on the monitor. 1 If the SPECIAL menu screen is CAMERA TITLE SETUP displayed, use the Function Setup switch so that the arrow indicates A B C D E F G H I J K L M ‘CAM TITLE’.
Page 30
setup INT : Internal Synchronization Type LL : Power Synchronization Type, Line-lock Press the Function Setup switch. You can select a desired phase from 0 to 359 when select ‘phase’. When using AC power at 60Hz(NTSC), 50Hz(PAL) frequency, you can use the LL type synchronization.
Page 31
- DIRECTION DIR1 : Detects objects moving left to right on the fence line. · DIR2 : Detects objects moving right to left on the fence line. · DIR1/2 : Detects all objects moving crosswise on the fence line. · - RETURN : Select this to save the POSITION menu settings and return to the TRACKING menu.
Page 32
setup DETECT AREA : Defines the Motion DETECT AREA Detection area. 1. TOP IIIIIIIIIIIIIIIIIIIIIIIII MASK AREA : Specify a detection 2. BOTTOM IIIIIIIIIIIIIIIIIIIII exception area to mask. 3. LEFT IIIIIIIIIIIIIIIIIIIIIIIII Select a mask area 4. RIGHT IIIIIIIIIIIIIIIIIIIII number and specify the 5.
Page 33
MASK COLOR : Determine area color. You can select GREEN, RED, BLUE, BLACK, WHITE and GRAY. TRANSPARENCY : Adds or removes transparency from the masking area. SEL POS/XPOS/YPOS : Adjust the size and position of the selected area. RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL menu.
Page 34
setup In the PROFILE menu, you can configure the following camera settings at once. BASIC DAY/NIGHT BACKLIGHT INDOOR USER SHUTTER MANUAL(1/250) A.FLK HIGH HIGH HIGH HIGH HIGH WHITE BAL OUTDOOR INDOOR BACKLIGHT USER BLC SSNR3 DAY/NIGHT AUTO AUTO AUTO AUTO AUTO EXIT Select a desired EXIT mode using the Function Setup switch depending on the camera...
Page 35
troubleshooting TROUblesHOOTING If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. pROblem sOlUTION ▶ Check that the power cord and line connection between the camera Nothing appears on the screen.
Page 36
SpecificationS ScV-3082 n ScV-3082 p ViDeo imaging Device 1/3’’ Super HAD CCD ( Double Scan ) total pixels 1028(H) x 508(V) 1028(H) x 596(V) effective pixels 976(H) x 494(V) 976(H) x 582(V) Scanning System 2 : 1 Interlace Synchronization...
Page 37
ScV-3082 n ScV-3082 p camera title Off / On (Displayed 15 characters) Day & night Auto (ICR) / EXTERNAL/ Color / B/W backlight compensation Off/ USER BLC / HLC / WDR Wide Dynamic range 128x (52dB) 160x (54dB) Dynamic range (ssDr) Off / On Digital noise reduction (SSNR Ⅲ...
Page 40
SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Park Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300, FAX : +44-1932-45-5325 www.samsungcctvusa.com...