Table of Contents
Advertisement
2) As soon as you turn on power, press <RED> button on remote twice within 3 seconds. The
following screen will come out (Require
3) There are four menus.
If you want to factory reset status, then select "wipe data/ factory reset". This will help
the situation when some applications you installed cause a problem.
4) Apply "wipe cache partition" first.
5) To make the device reboot again with fresh image, put the USB flash drive on the USB port,
then select "apply update from /usb". Please make sure that you have
USB drive.
revision 2.0.6
or later firmware)
88
update.zip
on the
Advertisement
Table of Contents
Need help?
Do you have a question about the F10 and is the answer not in the manual?
Questions and answers