Related Manuals for Caple WF1104
Summary of Contents for Caple WF1104
- Page 1 Instruction manual for freestanding wine cabinet Model code: WF1104 Contact Caple on 0844 800 3830 or for spares www.4caple.co.uk...
-
Page 3: Table Of Contents
Installation instructions Operating your wine cabinet Setting the temperature Locking the door Using the shelves How to change the door opening Care and maintenance Troubleshooting guide Caple Service contact details Defrosting/condensation The humidity system Recommended storage temperature Recommended drinking temperature... -
Page 4: Important Warnings And Advice
Thank you for buying your new Caple wine cabinet. To ensure that you get the best results from your new purchase, we strongly suggest that you read this instruction manual thoroughly before use. This manual contains installation advice, usage instructions and other important facts about your wine cabinet. -
Page 5: Installation Instructions
This product should not be treated as household waste and should be recycled. Please take it to your nearest collection facility, for further details contact your local council. Installation instructions IMPORTANT: Once in the final location wait 12 hours before switching your wine cabinet on for the first time Before turning the wine cabinet on ensure it is perfectly level, this will minimise any vibrations. -
Page 6: Operating Your Wine Cabinet
Operating your wine cabinet and setting the temperature The wine cabinet should be placed where the ambient temperature is between 5-32 deg centigrade. If the ambient temperature is above or below this range, the performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate and prevent it reaching the set temperature. -
Page 7: Locking The Door
When you use the wine cabinet for the first time or restart the wine cabinet after it has been switched off for a long time, there could be a few degrees variance between the temperature you select and the one indicated on the LED readout. This is normal and it is due to the length of the activation time. Once the wine cabinet has been running for a few hours, the temperature display will re-gain accuracy. -
Page 8: How To Change The Door Opening
How to change the door opening This appliance has reversible doors but is delivered with a right hinged door. The left hand hinge kit comes with the unit (in the box), should you wish to reverse the hinge on your unit. Fig.A Fig.B Fig.C... -
Page 9: Care And Maintenance
Care and maintenance Cleaning your wine cabinet • Turn off the power, unplug the appliance, and remove all items including shelves and rack. • Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to 2 pints of water. -
Page 10: Troubleshooting Guide
Problems with your wine cabinet You can solve many common wine cabinet problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling Caple Service. Troubleshooting Guide... -
Page 11: Defrosting/Condensation
Defrosting/condensation Your wine cabinet is designed with an “Auto-cycle” defrost system. When the RUN cycle is OFF, the refrigerated surface of the wine cabinet (interior rear wall) defrosts automatically. The defrost water is channelled into a drain pan which is located at the back of the wine cabinet next to the compressor from where it evaporates. - Page 12 Caple Fourth Way Avonmouth Bristol BS11 8DW www.caple.co.uk...
Need help?
Do you have a question about the WF1104 and is the answer not in the manual?
Questions and answers