Contents 7 Adjust system settings 1 Important Select blackout setting Safety Turn demo mode on/off Notice Select start volume Turn beep sound on/off 2 Your car audio system Turn display scroll on/off Introduction Select shock-protect setting What’s in the box Reset Overview of the main unit Overview of the remote control...
1 Important Notice Safety The making of unauthorized copies of • Read and understand all instructions copy-protected material, including computer before you use your apparatus. If damage programs, files, broadcasts and sound is caused by failure to follow instructions, recordings, may be an infringement of the warranty does not apply.
2 Your car audio system Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With the in-car audio system, you can enjoy your drive while you listen to: •...
Overview of the main unit p o n m l p o n m l e MENU / DISP • Select tuner band. • Display radio frequency, clock and • Select MP3/WMA folder. radio program type (if available). • Scroll up or down menu. •...
j External device socket Overview of the remote control • Select preset station no. 6 • Select preset station no. 5 m SHUF, 4 • Activate or deactivate shuffle mode. • Select preset station no. 4 n 3, REP • Set repeat play mode.
Select preset station no. 5. Always follow the instructions in this chapter in j SHUF, 4 sequence. If you contact Philips, you will be asked for the • Activate or deactivate shuffle mode. model and serial number of your apparatus. The •...
Note on the power supply lead (yellow) Connection: for cars with ISO • When you connect other devices to this connectors apparatus, ensure that the rating of the car circuit is higher than the total fuse Caution value of all the connected devices. •...
Page 10
Connector Connect to ANTENNA Antenna Cut off the bigger end of the supplied standard connector. REAR LINE OUT R Rear right speaker REAR LINE OUT L Rear left speaker Check the car’s wiring carefully and connect them to the supplied standard connector.
Page 11
Ensure that car dashboard opening is within these measurements: • The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. Mount in the dashboard If the car does not have an on-board drive or navigation computer, disconnect the negative terminal of the car battery.
Place the supplied rubber cushion over Press the left side of the panel and point the end of the mounting bolt. the left hole at the left pillar. Release the panel to engage the left side. Install remote control battery Caution •...
Turn on 4 Listen to radio Press to turn on the unit. • To turn off the unit, press for 3 Tune to a radio station seconds. Press SOURCE repeatedly to select Tuner. Set clock Press to select band: [FM1], [FM2], [FM3], [AM1], or [AM2] .
Store radio stations in Press MENU/DISP for 3 seconds. memory Turn to select [RDS ON]: » The RDS function is turned on. You can store up to 6 stations in each band. Select program type Store staions automatically Before tuning to RDS stations, you can select Press SEARCH first, then press program type and let the unit search only for »...
Receive traffic announcement Item Program type Description LEISURE Leisure If you do not want to miss traffic JAZZ Jazz Music announcement during enjoying music, you COUNTRY Country Music can turn on the TA (Traffic Announcement) function. NATION M National Music OLDIES Oldies Music Press MENU/DISP for 3 seconds.
5 Play audio files Play from USB Note Note • Ensure that the USB device contains playable music. • Ensure that the disc or device contains playable files. Insert the USB device Open the cover marked on the front Play a disc panel.
Control play Intro play • To select a folder, press or . You can play the first 10 seconds of each track. • To skip to the previous/next track, press During play, press INTRO, 2 to select: • [INT ON] : After the first 10 •...
6 Adjust sound Other sound settings You can also edit user preset EQ. Press EQ/Audio for 3 seconds. Adjust volume Press repeatedly to select the item to be adjusted: Turn clockwise/anticlockwise to • [BAS] (bass) range: -7 to +7. increase/decrease volume. •...
7 Adjust system Turn to select a setting: • [V - LAST] : Each time you turn on settings the unit, the volume remains from its previous use. • [V - ADJ] : Each time you turn on the unit, the volume is at the preset level. Select blackout setting Store preset volume You can set the screen to turn off automatically...
8 Additional Press repeatedly to until [ROLL ON] or [ROLL OFF] is displayed. information Turn to select a setting: • [ROLL ON] (scroll on): Auto scroll during play. • [ROLL OFF] (scroll off): No auto Detach the front panel scroll display. You can detach the front panel to deter theft.
4 - 8 Note Maximum power • If the new fuse gets damaged again, there may output 45 W x 4 channels be an internal malfunction. Consult your Philips dealer. Continuous power 22 W x 4 RMS output 10% T.H.D.) Pre-Amp output voltage 2.0 V...
If the problem remains • WMA V4, V7, V8, V9 (L1, L2) unsolved, go to the Philips web site (www. • ISO9660, Joliet philips.com/support). When you contact Philips, •...
The CD skips tracks 11 Glossary • Ensure that the CD is not damaged or dirty. • Ensure that random mode is deactivated. Disc cannot be ejected • Press and hold A file format with a sound data compression Preset stations lost. system.