Configuring Squeezebox; Set Up Networking - Slim Devices SQUEEZEBOX Owner's Manual

Squeezebox Owner's Guide

Configuring Squeezebox

When you plug in Squeezebox, the Slim Devices logo is displayed briefly,
followed by a welcome message.

Set Up Networking

. Press the
RIGHT
menu option is displayed.
2. Press the
RIGHT
3. If you have a wired-only Squeezebox, skip to step 8. If you have
a wireless Squeezebox, choose whether you want to connect
Squeezebox to a wireless or wired network by pressing the
arrows on the remote. When you have made your selection,
dOWN
press the
RIGHT
4. Squeezebox asks you for your local region or country. Scroll using
the arrow on the remote until you find the local region. Press
dOWN
the arrow to select your region.
RIGHT
Note: Failure to select the appropriate region may violate local laws.
5. Squeezebox will scan to find your wireless network. Select your
network name (SSID) and press the
If you are in an area where there are multiple wireless networks, you
can scroll down using the remote until you find the one you want to
use. If your router is not broadcasting your network name, you will
need to select "Enter a network name".
Tip: You can use the number buttons on the remote to enter text as
you might on a cell phone. Use the ADD button on the remote as a
backspace and the PLAY button to insert a letter.
6. Choose the type of encryption your wireless network uses. If you are
unsure, check the manual that came with your wireless router.
You can choose from No password/no encryption, 64-bit WEP, 128-bit
WEP, WPA Personal or WPA2 (AES). Scroll to your selection, then press
the arrow.
RIGHT
7. If your network is secured with WEP or WPA encryption, you'll need
SLIM DEVICES
arrow on the remote control. The Set Up Networking
arrow to enter networking setup.
arrow.
arrow.
RIGHT
7
and
Up