baTTeRY PRecaUTIons • Dispose of this unit properly . Do not dispose of the old unit in a fire . • The battery inside the unit may explode if mistreated . Do not attempt to disassemble the unit's battery . •...
locaTIon of PaRTs and conTRols Camera Lens 6 . Working Status LED 2 . Microphone Reset 3 . Pen Clip 8 . Twist Barrel 4 . USB Flash Drive 9 . Finger Grip 5 . Record On/Off Button 10 . Pen Tip Front Back...
THe INTerNal BaTTery IMPOrTaNT: charge the internal battery before first use. 1 . Turn off Video Spy Pen . 2 . Unscrew the pen to reveal the USB . 3 . Plug the USB into your computer’s USB 2 . 0 port .
Place the Video Spy Pen where it will get a clear view and audio of what you want to record . 2 . Press the RECORD On/OFF BUTTOn on the top of the pen for 5 seconds . 3 . The WORkInG STATUS LED will illuminate amber and after 5 seconds will blink blue to indicate recording has started .
Page 7
PlayINg recOrDeD FIleS Unscrew the pen to reveal the USB . 2 . Plug the USB into your computer’s USB port . 3 . Locate the removable disk drive on your computer . The drive letter will vary by computer . 4 .
Page 8
. 6 . Remove the USB from your computer . reFOrMaTTINg THe VIDeO SPy PeN MeMOry Unscrew the pen to reveal the USB . 2 . Plug the USB into your computer’s USB 2 . 0 port .
5 . Open this new file and enter current date and time in the following format "TIME, Y YYY/MM/DD/HH:MM:SS;" . 6 . Save and close this file before removing the pen from the USB port . Remove the Video Spy Pen from the USB port .
. 2 . To recharge the Video Spy Pen, see the instructions on page 4 . 3 . To reset the Video Spy Pen, press the RESET button with a thin, pointed object . RePlacIng The Ink caRTRIdge Unscrew the pen to reveal the USB .
TRoUbleshooTIng ISSUe SOlUTION When I plug the Video Spy Pen Double click on the icon that appears into the USB on my computer it when you connect the USB or browse does not automatically open . your computer for new hardware .
Page 13
TRoUbleshooTIng (COnTInUED) ISSUe SOlUTION When I plug the Video Spy Pen Unit may need to be reset . into the USB on my computer, the Reset the unit . charging light does not come on . Unit may need to be reset .
(“Warranty Period”) . If a defect arises and a valid claim is received within the Warranty Period, at its option, Brookstone will either 1) repair the defect at no charge, using new or refurbished replacement parts, or 2) replace the product with a new product that is at least functionally equivalent to the original product, or 3) provide a store credit in the amount of the purchase price of the original product .
Page 15
Brookstone, in so far as permitted by law, provides these products “as is . ” This warranty does not apply to: a) damage caused by failure to follow instructions relating to product’s use or the installation of components; b) damage caused by accident, abuse, misuse, fire, floods, earthquake or other external causes;...
Page 16
Merrimack, New Hampshire USA 03054 • 800-846-3000 • www.Brookstone.com 641399...
Need help?
Do you have a question about the Video Spy Pen and is the answer not in the manual?
Questions and answers