Related Manuals for Belling 77cm Hob Touch
Summary of Contents for Belling 77cm Hob Touch
- Page 1 Users Guide & Installation Handbook Belling 77cm Hob Touch UK Part No 083316700 Date 15/07/2013...
- Page 2 CONTENTS & INTRODUCTION CONTENTS WARRANTY • SAFETY Your new appliance comes with our 12-month guarantee, protecting you • USING THE PRODUCT against electrical and mechanical • CLEANING breakdown. To register your appliance please call 0844 481 0182, complete • INSTALLATION INSTRUCTIONS the registration form included or register •...
- Page 3 SAFETY appliance. Cleaning and BEFORE USING THE PRODUCT Make sure that you have removed all user maintenance shall packaging and wrapping. Some of the not be made by children items inside this appliance may have additional wrapping. without supervision. GENERAL WARNING! - WARNING! - The Unattended cooking on...
- Page 4 SAFETY during use, as this will correctly fitted. seriously affect the WARNING! - There is safety and performance, a risk of electric shock, particularly in relation so always make sure to surface temperatures you have turned off becoming hot and gas and unplugged your operated parts not appliance before...
- Page 5 SAFETY electrical switch. on the hob surface since they can get hot. Contact your local gas supplier immediately. Ensure you switch off the appropriate cook ELECTRIC INDUCTION HOB zone individually or (by WARNING:- the central on/off key if Unattended cooking on touch control) when you a hob can be dangerous have finished cooking,...
- Page 6 SAFETY fail-safe. The pacemaker Prolonged intensive use must be designed of the appliance may call in compliance with for additional ventilation, the appropriate for example opening regulations. of a window, or more effective ventilation, Caution: This appliance for example increasing is for cooking purposes the level of mechanical only.
- Page 7 SAFETY the hob when you’re not damaged. around - take them off The glass ceramic can the cook zone if you get hot whilst cooking; have to leave the kitchen even though the cook even if you think it will zone itself does not only be for a moment, generate heat.
-
Page 8: Packaging Material
SAFETY This hob is not intended to be kitchen: opertated by means of a external • Pull the plug out, or switch off the timer or seperate remote control power at the fuse box - this may be system. enough to stop the fire immediately Fire Safety Advice •... -
Page 9: Touch Controls
USING THE HOB - ELECTRIC (CERAMIC) DUAL ZONE KEY DUAL ZONE KEY KEY 2 KEY 2 KEY 3 KEY 3 KEY 1 KEY 1 KEY 4 KEY 4 fig 1 To select a setting on the selector; either Touch at one point to “jump” to a specific setting slide your finger along the selector to respond to your touch. - Page 10 USING THE HOB - ELECTRIC (CERAMIC) When power is first switched on the hob 6, To adjust the power setting follow will always start up with the Key Lock steps 3-5 above. activated. 7, Repeat the above as necessary for the Key Lock other zones. Note: During cooking, the elements will A Red Led indicates when the key lock is active, to deactivate/activate, touch the cycle on and off.
- Page 11 USING THE HOB - ELECTRIC (CERAMIC) To operate the dual cook zone pausing of the cooking process, if the Pause key is touched for more than • Select the appropriate cook zone and 120 milliseconds. set the power level as per the single Pause LED blinks, a pause sound is •...
- Page 12 USING THE HOB - ELECTRIC (CERAMIC) Timer (All Cook Zones) Refered All 5 cooking zones can be operated under Timer zone the timer independently and at the same LED’s time for up to 99 minutes. When the set Timer adjust indicator time expires the timer will beep and the cook zone will switch off automatically.
-
Page 13: Error Codes
ERROR CODES Appliance errors Event that generates the Effect in the Heater Display Description Normal status recovery error appliance (fore 0.5 sec./ back 0.5 sec) (Visualization Priority Order) Microcontroller Internal ‘F0’ Microcontroller fault App. off ------- Error ‘FA’ Security Key Error On/Off key emitter fault When the fault disappears App. - Page 14 CLEANING ELECTRIC HOB follow the circular grooves and avoid damaging the red spots. Make sure Ceramic glass hobs that you allow the hotplate to dry before use by switching on the ele- • It is recommended that you clean ments at a low heat. and wash the hob surface before using for the first time. Apply a thin •...
-
Page 15: General Information
INSTALLATION General information between hob base and appliance must be maintained. Installation should only be carried out by Installation above an oven a qualified installer or engineer. Please keep to the following points most Refer to the manufacturer’s instructions carefully; for clearances above the oven. Although every care has been taken to We recommend a 25mm gap between the ensure this appliance has no burrs, or... - Page 16 INSTALLATION Clearances and dimension – require- There must be a minimum clearance of ments 50mm between the rear edge of the hob and the rear wall. This clearance must No shelf or overhang of combustible be maintained up to 650mm above the material should be closer than 650mm worktop.
-
Page 17: Fitting Into Worktop
INSTALLATION Fitting into worktop Recessed Method Cut a hole in the work surface to the Recess the work top to the appropriate required size. The worktop must be of depth (Approx 5mm) and shape to fit the heat-resistant material or covered with hob (add 1mm to overall glass size). Refer heat-resistant material. to the installation bracket advice to deter- mine your installation type. - Page 18 INSTALLATION Installation Bracket Advice Installation pack 2 Secure the hob to the worktop by means 4 x Cranked installation bracket of the brackets provided, taking the thick- 4 x Spire clips (70/77/90cm appliances ness of the worktop into account. only) 4 x No8 Screws UNDERSIDE OF HOB Depending on your appliance the cranked...
- Page 19 INSTALLATION CONNECT TO THE ELECTRICITY • Remove the cable clamp screw and SUPPLY release the cable clamp retaining arm. WARNING: This appliance must be earthed. Only connect to the electrical Note; mains terminal with the power switched The cable clamp has a ratchet type off.
-
Page 20: Technical Data
TECHNICAL DATA SUPPLY: 220 -240V ~ 50Hz 5.04kW - 8.2kW Refer to the data badge on the under side of your hob for specific power rating of your model... -
Page 21: Customer Care
CUSTOMER CARE CUSTOMER CARE WEB SHOP range of Bake ware and Cookware essen- tials including Roasting Pans, Cake Tins Having purchased a superior cooker, hob and Non-Stick Cooking Liners. or hood from us, you’ll naturally want to keep it looking great. And who better to For all enquires, please visit our Web Shop at www.gdhaonline.co.uk or help you care for it than the manufac-... - Page 22 Please keep this handbook for future reference, or for anyone else who may use the appliance.
- Page 23 Please keep this handbook for future reference, or for anyone else who may use the appliance.
- Page 24 CUSTOMER CARE To contact Belling about your appliance, please call Warranty Registration 0844 481 0182 to register your appliance Customer Care Helpline 0844 815 3746 in case of difficulty within the UK Alternatively general, spares and service information is available from our website at www.belling.co.uk Please ensure that you have the product’s model no and serial no available when you call. These can be found on the silver data label on your product which is located:...
Need help?
Do you have a question about the 77cm Hob Touch and is the answer not in the manual?
Questions and answers