Zanussi Ideal IZTE 135 User Manual page 11

When the programme
has finished the pilot
lights End is on.
Start / Pause
Press this button to
start the dryer after
having selected the
programme and the
options. The relevant
light will stop flashing. If
the programme selector
dial is turned to another
position, when the
machine is running, the
buzzer will sound and
the programme phase
indicator lights will
flash. The drum turns
alternately in both direc-
tions during drying.
All drying programmes
end with a 10 minute
cooling phase (light
Cooling is on). You may
remove the laundry af-
ter this phase.
The display will show
the symbol Delicate
and and illu-
minate and the buzzer
sounds.
If the door of the appli-
ance or the small door
at the bottom is opened
while the programme
is running, this button
must be pressed again
after closing the door in
order to restart the pro-
gramme from the point
at which it was interrupt-
ed. This button must be
depressed also after a
power failure and after
having reinserted the
water reservoir, if it has
been emptied in the
middle of a programme
after lighting up of light.
In both cases the light
of the Start/Pause
button flashes to remind
you that the start button
needs to be pressed
again.
Indicator lights
These lights indicate
the following functions:
• Drying light
This light indicates that
the appliance is in the
drying phase.
• End of programme
light
This light is on at the end
of the cooling phase,
,
during the anticreasing
phase and at the end of
the programme.
• Water reservoir full
light
This light indicates
that the appliance is in
the drying phase. This
light comes on at the
end of the programme
to remind you that the
water reservoir must
be emptied out. If this
light illuminates dur-
ing a programme this
means that the water
reservoir is full. The
buzzer sounds, the pro-
gramme stops, the light
of the Start/Pause
button flashes. This
light comes on also
when the water reser-
voir is not inserted cor-
rectly.
• Filter cleaning
This light illuminates
at the end of the pro-
gramme to remind you
that the filters must be
cleaned.
• Condenser cleaning
It comes on every 80
cycles to remind you
that the condenser
must be cleaned.
Cancelling a programme
Turn the selector dial
to "O" to cancel a pro-
gramme which is run-
ning. Now you can se-
lect a new programme.
Tumble Dryer
At the end of the
programme
If the laundry is not
removed at the end
of the cycle, the dryer
performs an anticreas-
ing phase (duration: 30
minutes maximum).
If you do not remove
the laundry, the dryer
will stop automatically
at the end of the anti-
creasing phase. Lights
End/Anticrease ,
and remain lit and
the buzzer sounds for 2
minutes.
Turn the programme
selector dial to "O" to
switch the machine
off. Remove the laun-
dry from the drum and
carefully check that the
drum is empty.
Buzzer permamently
off.
The buzzer can be
off by pressing at the
same time
Delicate and Textile
buttons, for approx.
5 sec.
11