Ethernet Level Commands - Nokia M1122 Administrator's Manual

M1122 Administrator Manual

Ethernet level commands

Command
Description
Syntax
Arguments
Example
M1122(conf-eth)#bridging
M1122(conf-eth)#
Command
Description
Syntax
Arguments
Example
M1122(conf-eth)#ip address 192.168.132.11
255.255.255.0
M1122(conf-eth)#
Command
Description
Syntax
Arguments
Example
M1122(conf-eth)#ip rip-send v1
M1122(conf-eth)#
5-48
Switch on/off bridging
Switches on/off bridging.
[no] bridging
no switches bridging off.
Switch on/off IP function in Ethernet interface
Switches on/off IP function in the Ethernet interface.
[no] ip address <ip-address> <ip-mask>
no switches IP function off.
ip-address is the IP address you want to assign to
the Ethernet interface.
ip-mask is the subnet mask.
Switch on/off RIP send function in Ethernet inter-
face
Switches on/off RIP send function. When enabled
M1122 sends Routing Information Protocol messages
to other routers.
[no] ip rip-send {rip-send-mode}
no switches rip-send function off.
v1 send-mode selects RIP version 1.
v2 send-mode selects RIP version 2.
compatible-v1 send-mode selects the sending of
RIPv2 packets using broadcast.
E Copyright Nokia Networks Oy
C33906001SE_00