WARNINGS It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings.
CONTENTS Warnings Defrosting Customer service and spare parts Installation Cleaning the interior Operation Location Temperature regulation Electrical connection Fresh food refrigeration Rear spacers Movable shelves Changing the opening direction of the door Positioning the door shelves Hints Hints for refrigeration Maintenance Periodic cleaning Periods of no operation...
Cleaning the interior ¥ how often the door is opened; ¥ the quantity of food stored; Before using the appliance for the first time, wash ¥ location of appliance. the interior and all internal accessories with luke- warm water and some neutral soap so as to remove A medium setting is generally the most suitable.
HINTS provided. Hints for refrigeration Butter and cheese: these should be placed in Useful hints: special airtight containers or wrapped in aluminium Meat (all types): wrap in polythene bags and place foil or polythene bags to exclude as much air as on the glass shelf above the vegetable drawer.
Important: Never use sharp metal tools to scrape off frost from the evaporator as you could damage it. Do not use a maechanical device or any artificial means to speed up the thawing process other than those recommended by the manufacturer. CUSTOMER SERVICE AND SPARE PARTS If the appliance is not functioning properly, check ¥...
Electrical connection Before plugging in, ensure that the voltage and frequency shown on the serial number plate correspond to your domestic power supply. Voltage can vary by ±6% of the rated voltage. For operation with different voltages, a suitably sized auto-transformer must be used.
Rear spacers In the bag with the documentation, there are two spacers which must be fitted in the two top corners. Slacken the screws and insert the scraper under the screw head, then re-tighten the screws. D594 Changing the opening direction of the door Before buiding-in the appliance (if necessary), change the opening direction of the door.