Https And Snmp Function Update Procedure - JVC VN-H37U Instructions Manual

HTTPS and SNMP Function
Update Procedure
The camera's default settings do not support using the HTTPS and SNMP functions. To use the HTTPS
and SNMP functions, use the firmware update function via the Maintenance Page, and update to the
firmware version designated below. (A Page 79)
Acquire firmware for updating via the site below.
http://www3.jvckenwood.com/english/pro/vnetworks/index.html
The file names of the firmware files used for updating are as follows.
h137u_v2.00.214forSupport.img
Model name
or
h137u_v2.00.214woActiveX.img
Model name
To use the HTTPS and SNMP functions, update using the firmware with the following file name
characteristics.
h***_v*.**..www.woActiveX.img
Note:
● ActiveX for the Built-in Viewer is not included; with the camera at its factory default settings, install
the Built-in Viewer's ActiveX to your computer via Internet Explorer while set to the factory default
settings, and update the camera's firmware.
To revert to the original firmware for which the HTTPS and SNMP functions cannot be used, return the
camera settings to factory defaults, and update using the firmware with the following file name
characteristics.
h***_v*.**.***forSupport.img
You can install ActiveX to your computer by accessing the Built-in Viewer URL via Internet Explorer.
Version number
Version number
125