Power Management Setup] Window; Figure 1.109 [Power Management Setup] Window; Table 1.153 Display Items And Set Items Of [Power Management Setup] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
(2) Window Operations
1. Input the IP address, prefix length and sets whether video redirection and virtual media should be used.
2. Click the [Apply] button.
[Message]
This section describes the messages to be displayed on this window.
Message Number
W_00432
W_00433
I_00417

1.7.10 [Power Management Setup] Window

In the [Power Management Setup] window, Power Saving can be set in the system.
Power Saving can be set only when the Power save Control as system is Enable.
When the System Power Save setting is Disable, then the display of this screen is shown as gray and
cannot be set.

TABLE 1.153 Display Items and Set Items of [Power Management Setup] Window

Items
Power Control Status
Power save Grace Period
Invalid IP Address specified
The duplicate IP address was found.
Are you sure?

FIGURE 1.109 [Power management Setup] window

Displays the operating state of power control status of systemn.

Normal:
suppression function for limitation of the electric power consumption is not
working.

Power Saving: Shows that the operating rate is being suppressed
Sets shutdown waiting time in Power Save Grace Period System when the Limit
threshold is exceeded.
Specified in the range of 0 ~ 99 minutes.
Message
Description
Normal operating state. Shows that the operating rate